To Next PageTo Next PageWhy is detergent left in the dispenser cups of my GE GDT225-226?
This is usually because dishes or utensils are blocking the detergent cup. Reposition the dishes so the water from the lower spray arm can flush the detergent cup (see the Loading section). Also, reposition tall utensils or heavy silverware that may be keeping the dispenser cup door from opening.
Why does my GE GDT225-226 have a stained tub interior?
An overall yellow or brown film can be caused by iron deposits in water. A special filter in the water supply line is the only way to correct this problem. Contact a water softener company. White film on the inside surface is usually hard water minerals. We recommend Finish® Jet-Dry® Rinse Aid to help prevent hard water mineral deposits from forming. You can also run the dishwasher with citric acid to remove mineral deposits. Citric acid (Part number: WD35X151) can be ordered through GE Appliances Parts. Alternatively, purchase Finish® Dishwasher Cleaner and follow the directions on the label.
What does it mean if the start status indicator light is flashing on my GE Dishwasher?
The flashing light indicates that the door was opened or the cycle was interrupted. Press the Start pad once and close the door within 4 seconds to start the dishwasher. Press the Start pad a second time when the dishwasher is running only if you wish to cancel the cycle.
What does it mean if my GE GDT225-226 BEEPS once every minute?
This is a reminder that your dishwasher door has been left open during operation. Press Start and close the door.
General| Type | Built-In |
|---|---|
| Drying System | Heated Dry |
| Control Type | Electronic |
| Number of Options | 4 |
| Water Filtration System | Yes |
| Racks | 2 |
| Silverware Basket | Yes |
| Interior Lighting | No |
| Leveling Legs | Yes |
| Energy Star Certified | Yes |
| Delay Start | Yes |
| Third Rack | No |
| Water Heater | Yes |
| Dry Option | Heated Dry |
| Lower Rack Features | Adjustable |
| Dimensions (W x H x D) | 24 in x 34 in x 24 in |
