Need help?Do you have a question about the GE GDT695SxJ0 Series and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Capacity | 16 place settings |
| Noise Level | 45 dBA |
| Energy Star Rated | Yes |
| Number of Wash Cycles | 7 |
| Leveling Legs | Yes |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Stainless Steel Interior | Yes |
| Wash Cycles | Heavy, Light, Normal, Rinse |
| Drying System | Heated Dry |
| Control Type | Electronic |
| Upper Rack Features | Adjustable, Fold-Down Tines |
| Lower Rack Features | Fold-Down Tines |
| Delay Start | Yes |
Essential safety warnings and reconnection of grounding devices for appliance servicing.
Details required safety equipment and the mandatory 6-step Lockout/Tagout procedure.
Detailed AC and DC voltage, resistance, and wattage for key electrical components.
Table of minimum and maximum cycle durations based on selected options.
Defines target and maximum temperature limits for various wash cycles.
Information on Service LED, flashing lights, Consumer Error Mode, and Service Mode.
Step-by-step guide to diagnose and resolve 'Will Not Start' issues.
Details on entering and exiting Consumer Error Mode and Service Mode.
Procedure for diagnosing the door latch switch using continuity checks.
Step-by-step guide for safely removing the dishwasher door.
Steps to remove the detergent module from the inner door panel.
Procedure for testing the detergent module using Service Mode.
Detailed procedure for removing the sump module from the dishwasher.
Description of the main control board and its outputs.
Introduction to Current Sense Module (CSM) and how to enter Consumer Error Mode.
Procedure for entering and utilizing Service Mode for diagnostics.
Guidance on checking main and UI control boards for faults.
Interpreting Service LED blink patterns for main control board diagnostics.
Explanation of CSM function, detection limits, and common tripping causes.
Flowchart for diagnosing CSM trips and related component failures.
Diagrams showing the top and bottom sides of the main control board.
Procedure for safely accessing and removing the main control board.
Troubleshooting UI display and LED issues using blink patterns.
Checking UI operational voltage and troubleshooting main control to UI communication.
Flowchart to diagnose issues related to dishwasher fill problems.
Instructions for using the clear door tool to diagnose wash performance.
Procedures for running fill, circulate, and drain tests for diagnosis.
Flowchart to diagnose and resolve issues with the circulation pump not running.
Information on the circulation motor fuse and its test points on the main control board.
Procedure for removing the circulation pump motor assembly.
Explanation of how the turbidity sensor measures soil level and its impact.
Table of thermistor resistances at different temperatures and checking methods.
Flowchart to diagnose issues with the drain pump operation.
Procedure for removing and replacing the drain pump assembly.
Flowchart to diagnose issues with the heat element not coming on.
To Next Page
