9
"<1>-@5:3:?@>A/@5;:? %-21@E:?@>A/@5;:?;:?A91>%A<<;>@ &>;A.81?4;;@5:3&5<?
.;A@@410>E1>/;:@>;8<-:18
>E&19<
You can change the temperature of your dry cycle.
ANTI-BACTERIAL This option may only be used with COTTONS or MIXED LOAD cycles. This option reduces
(on some models) certain types of bacteria by 99.9%, including: $<*81A47,7,,=;*=:.=;";.=-7576*;
*.:=0267;* and 4.+;2.44*86.=5762*.. The anti-bacterial process occurs when high
heat is used during a portion of this drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol "$*62<2B*<276".:/7:5*6,.7/#.;2-.6<2*447<1.;:A.:;.
HIGH For regular to heavy cottons.
MEDIUM For synthetics, blends and items labeled permanent press.
LOW For delicates, synthetics and items labeled %=5+4.:A7?.
EXTRA LOW For lingerie and special-care fabrics.
NO HEAT Can only be used with TIMED DRY.
(on some models)
%&$&
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer.
Press it again to restart the dry cycle.
EE/8176;75.57-.4;
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
&;?@;>1- ++/;9.5:-@5;:;2?1@@5:3?
Select your drying cycle.
Change $+& # and %!%"$$+( settings to fit your needs.
Select any drying "#&"!% you want.
Press and hold the pad for three seconds to store your selection. A beep will sound
and the pad will light up.
&;>1/-88E;A>?@;>10 ++/;9.5:-@5;:
Press the ++ button before drying a load.
&;/4-:31E;A>?@;>10 ++/;9.5:-@5;:
Follow steps 1–4 in J&;?@;>1- ++/;9.5:-@5;:;2?1@@5:3?K.
J!!&&$K91??-31
(This message represents only a reminder.)
After the #")$ button is pressed, the J!!&&$K message could appear if the previous
cycle was not finished.
This message will disappear after the %&$& button is pressed. Even though you have already cleaned
the filter (before or after the #")$ button has been pressed), the J!!&&$K message will
still be displayed until the %&$& button is activated.
To Next Page
