Safety Information
Important Safety Notice
The information in this service guide is intended for use by individuals possessing adequate backgrounds
of electrical, electronic, and mechanical experience. Any attempt to repair a major appliance may result in
personal injury and property damage. The manufacturer or seller cannot be responsible for the interpreta-
tion of this information, nor can it assume any liability in connection with its use.
Warning
To avoid personal injury, follow OSHA Lock-out Tag-out Standard requirements controlling and maintain-
ing a zero energy state. To perform necessary live power electrical diagnostics, electrical safety personal
protective equipment (PPE) and barriers must be utilized to comply with OSHA electrical safety require-
ments.
Reconnect all Grounding Devices
If grounding wires, screws, straps, clips ,nuts, or washers used to complete a path to ground are removed
for service, they must be returned to their original position and properly fastened.
GE Appliances & Lighting
Technical Service Guide
Copyright © 2014
All rights reserved. This service guide may not be reproduced in whole or part in any form without written
permission from the General Electric Company.
To Next Page
Loading...
Need help?
General
