EasyManuals Logo

GE GSD2800 Series User Manual

GE GSD2800 Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Care and Cleating
USER MAINTENANCE
INSTRUCTIONS
Clean the control panel with a
lightly dampened cloth. Dry
thoroughly. Do not use abrasives
or sharp objects on the panel. They
can damage it.
Clean the outside with a good
appliance polish wax. The outside
cabinet finish is durable, but it can
scratch. So use no scouring pads,
or harsh or gritty cleaners.
Appliance Polish Wax & Cleaner
(Cat. No.
WR97X0216) is
available from GE Appliance
Parts Mart.
The inside usually takes care of
itself. If it should ever need
cleaning, use a mild cleansing
powder. Scouring pads and harsh
cleaners can mar the finish.
Built-in dishwashers
often use an air gap.
Keep it clean.
An air gap is a plumbing device.
It protects your dishwasher against
water backing up into it if a drain
clogs. The air gap is not a part of
the dishwasher. And you may not
even have one. Not all plumbing
codes require air gaps.
If you have an air gap, check it at
least once a month. IT IS NOT
PART OF YOUR DISHWASHER.
IT IS NOT COVERED IN YOUR
WARRANTY.
The air gap is easy to clean.
With most types, first turn off
the dishwasher, then lift off the
chrome cover. Then unscrew the
plastic cap and check for any
buildup of grit. A toothpick makes
cleaning easy.
Check the air gap any time your
dishwasher isn’t draining well.
Not using your dishwasher
in winter? Protect against
freezing.
If your dishwasher is left in an
unheated place during the winter,
ask a service technician to:
Cut off electric power to the
dishwasher. Remove fuses or trip
circuit breaker.
c
Turn off the water supply.
Disconnect the water
inlet
line
from the water
valve.
Drain water from the inlet line
and water valve. (Use a pan to
catch the water.)
Reconnect the water inlet line to
the water valve.
Drain the collection chamber at
rear of unit below filter by
disconnecting hose to pump.
Reconnect after draining.
s
Remove the plastic pump cover in
the tub bottom and use a sponge to
soak up water in the rubber boot.
20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE GSD2800 Series and is the answer not in the manual?

GE GSD2800 Series Specifications

General IconGeneral
BrandGE
ModelGSD2800 Series
CategoryDishwasher
LanguageEnglish

Related product manuals