How to change color panels
If you are redecorating, you can
change your dishwasher’s front
panels to match or blend with your
new colors.
The
panels
are held in place by the
door trim and the trim on the panel
behind the door. Each side of each
panel is a different color. Or you
can paint a panel with the color of
your own choice.
How to change door panel
inserts:
1. Take
out
trim screws on either
side of dishwasher door. Remove
the side trim.
2. Slide out both insert panels
together.
3. Put the color you want in front.
(Careful—edges may be sharp.)
4. Replace insert panels, side trim
and screws.
How to change lower panel inserts:
1. Remove access panel
attachment screws.
2. Remove the entire access panel.
3. Take out screws and remove the
top trim.
4. Slide out both insert panels
together.
5. Put the color you want in front.
6. Replace insert panels, top trim
and screws.
7. Replace the entire access panel
and attachment screws.
Color insert
panels
for both door
and panel can be replaced by V4°
thick wood inserts to match your
kitchen cabinets. Get them from
your nearest cabinet or lumber
dealer.
Dimensions for V4° wood inserts:
Door Panel:
19
X“
H x 23%,;’ W.
Lower Panel: 3
‘~,;’
H x
23~(~’
W.
NOTE: Do not operate dishwasher
while
changing panels or when
lower access
panel
is removed.
Change
c:(]lc~r
in
minute.v.
Just
remove
trim and change.
21
—
—
—-
——
.—
—
To Next Page
Loading...
Need help?
General
