The SYSTEMS MONITOR tells you what’s happeting
DISPLAY
WHAT IT MEANS
NUMERALS FROM
Number
of minutes left in the cycle.
1 to
99
MINUTES
NUMERALS FROM
Number of hours delay until start of cycle.
1 to 9
HRS.
DELAY
ENERGY MONITOR
Shows relative amount of energy used from LO (one bar lighted) to HI (all five bars
LO——
— — — HI
lighted).
ENERGY SAVER Indicates energy-efficient selection made such as SHORT WASH, LIGHT SOIL or
ENERGY SAVER (UNHEATED) DRYING.
WASHING
]
Displayed during Pre-wash, Pre-rinse and Main Wash periods.
RINSE Displayed during Rinse periods following the Main Wash.
DRYING
Displayed during HEATED DRY on when selected.
RINSED ONLY Indicates completion of RINSE & HOLD cycle. Remains on until door is unlatched.
HEATING
Indicates water is being heated—in wash or rinse period—to temperature necessary for
good washability. The minutes countdown is on hold for up to a maximum of 30
minutes when “HEATING” is displayed.
PLUS HEATING Indicates HEATED RINSE on option was selected prior to start of cycle. Cycle time
may be increased (up to a maximum of 20 minutes) to heat final rinse water to
145°F.
During the heating extension the minutes countdown is on hold.
CLEAN
I
Indicates completed cycle (except
RINSE&HOLD).
Remains
onuntildoor
is unlatched.
LOCKED Indicates controls are locked to prevent unauthorized use.
PF
RESET
Indicates a power failure occurred.
RESET The CLEAR RESET pad was touched.
7
—
To Next Page
Loading...
