R
*
PROBLEM
CHIPPING OF CHINA
SMALL AMOUNT
OF WATER
STANDING IN
THE BOTTOM
OF THE TUB
WATERWON’T
PUMP OUT OF
THE TUB
SUDSIN THETUB
DISHWASHER
LEAKS
POSSIBLECAUSEANDREMEDY
Rough handling can cause chipping.Load wi[h care. Make sure glasswareand china are
secure and can’tjar loose. (See page 8 for correct way to load glassware,)Make sure
tall glasses and stemware will clear the top of the tub when you push the rack into the
dishwasher.
Always use the top rack for delicateitems.
Wateraround the outlet on the tub bottom at the back of the tub is normal. It is clean
water. It’s there to keep the water seal lubricated.
If theentirebottomof thetubhaswater,youmayhavea drainproblem.Cleantheair
gap,if youhaveone.(Seepage14.)
Checkthekitchensink.Is it drainingwell?YOLLmayneeda plumber.
If dishwasherdrainsintodisposer,rundisposertoclear.Besuredisposeris not
clogged.
Sudsingdetergentsarenotmeantfordishwashers.USEONLYAUTOMATIC
DISHWASHERDETERGENTSTOAVOIDSUDSING.
Toremovesudsfrom the tub: Openthedishwasher.Letsudsevaporate.Add 1gallon
ofcoldwaterto thetub.Closeandlatchthedishwasher.Pumpoutwaterby slowly
turningthecontroldialuntila drainperiodis reached.
Repeatifnecessary.
suds can cause unit to overflow. That’s why it’s so important to use a detergentthat’s
iesigned for automatic dishwashers.
Spilling the rinse agent can cause foam during washing. This can lead to overflowing.
Wipe up accidental spill of rinse agent with a damp cloth.
H’you need more help...call,tollfree:
GEAnswerCenter”
800.626.2000
consumer informationservice
.
To Next Page
Loading...
