S
sherri41Sep 2, 2025
Why does the basket seem loose in my GE GTW491?
- MMr. Benjamin GrahamSep 2, 2025
If the basket seems loose in your GE Washer, it's normal. The washer basket does not have a traditional brake and will move freely.
To Next PageTo Next PageWhy does the basket seem loose in my GE GTW491?
If the basket seems loose in your GE Washer, it's normal. The washer basket does not have a traditional brake and will move freely.
Why does my GE Washer make a “squeaking” sound?
If you hear a “squeaking” sound from your GE Washer, it could be that the washer isn't level and is rubbing on the cabinet. To fix this, adjust the leveling legs by rotating each leg in the proper direction until the washer is stable.
Why does my GE Washer leave colored spots on clothes?
If you notice colored spots on your clothes after washing in your GE Washer, it could be due to: * Incorrect use of fabric softener. Check the package instructions and follow directions for using the dispenser. Make sure you have selected the Deep Rinse/Extra Rinse option (on some models). Pretreat the stain and rewash using the Quick Wash cycle before drying (on some models). * Dye transfer. Sort whites or lightly colored items from dark colors.
Why is there lint or residue on clothes after washing in my GE Washer?
If your GE Washer is producing lint or residue on clothes, here's what might be happening: * Clothes that are air-dried or line-dried may retain more lint. * Ensure you are separating lint producers from lint collectors. * Avoid washing small loads for too long; use a Light Soil setting for shorter wash times. * Rewash, using a liquid detergent and warmer water temperature to help dissolve detergent. * Loosely load clothes in the washer basket, placing items around the outside for best results. * Check the fabric softener package for correct usage and ensure you've selected the Deep Rinse/Extra Rinse option (on some models).
Why does the water level seem low in my GE GTW491 Washer?
The water level in your GE Washer may not cover the top level of the clothes. This is normal for this high efficiency washer.
What to do if my GE GTW491 Washer is leaking water?
If your GE Washer is leaking water, there are several potential causes. First, ensure you are using the correct amount of High Efficiency detergent. Using too much detergent, especially in soft water, can cause leaks. Also, check that the fill and drain hoses are tightly connected to the faucets and the drain facility, and that rubber washers are properly installed. A clogged household drain could also be the culprit, potentially requiring a plumber. Ensure the drain hose isn't rubbing against the wall, which can cause wear. Finally, ensure the hoses are tightened at the faucets and inspect the fill hoses for damage; replace them every 5 years.
How to prevent lint on clothes in my GE GTW491?
To prevent lint or residue on clothes in your GE Washer, consider these points: If you air dry your clothes, they may retain more lint. Separate lint producers from lint collectors when sorting your laundry. For small loads, use a shorter wash time with the Light Soil setting. If detergent isn't dissolving properly, rewash using liquid detergent and warmer water. Avoid overloading the washer, and loosely load clothes around the outside of the basket. Check the fabric softener package for correct usage and ensure the Deep Rinse option is selected (on some models).
How to reduce suds in my GE Washer?
To reduce excessive suds in your GE Washer, consider the following: If you have soft water, use less detergent. Measure your detergent carefully, and if the load is lightly soiled, reduce the amount of soap. Also, consider switching to a High Efficiency detergent.
How to fix a GE GTW491 Washer when the water won’t drain?
If the water isn't draining from your GE washer, check if the drain hose is kinked or improperly connected. Straighten the drain hose, ensure the washer isn't sitting on it, and verify that the top of the drain outlet is less than 8 ft (2.44 m) above the floor.
How to fix a GE GTW491 Washer that won't operate?
If your GE Washer isn't operating, here are a few things to check: * Make sure the power cord is securely plugged into a working outlet. * Ensure both hot and cold water faucets are fully turned on. * Confirm that the lid is closed and press Start, as a safety feature prevents operation when the lid is open. * Check your house's circuit breakers or fuses and replace if necessary. The washer should ideally have its own separate outlet. * Try resetting the electronics by unplugging the washer, waiting two minutes, plugging it back in, and then pressing Start. * Ensure you have pressed the Start button.
General
