To Next PageTo Next PageHow to stop clothes from wrinkling in my GE Dryer?
To prevent clothes from wrinkling, avoid overdrying by selecting a shorter drying time, removing items while they still hold a slight amount of moisture, or selecting a Less Dry setting. Also, remove items when the cycle ends and fold or hang them immediately. Avoid overloading the dryer by separating large loads into smaller ones.
What to do if my GE GTX52EASPWB Dryer doesn't start?
If your GE Dryer isn't starting, first, ensure the dryer plug is completely pushed into the outlet. Also, check the building’s fuse/circuit breaker box and replace the fuse or reset the breaker. Note that some electric dryers use two fuses/breakers, so make sure both are operating.
What to do if my GE GTX52EASPWB doesn’t heat up?
If your GE Dryer tumbles but doesn’t heat, check the building’s fuse/circuit breaker box and replace both fuses or reset both breakers, as some electric dryers use two. For gas models, ensure the gas shutoff at the dryer and the main shutoff are fully open, and that the LP gas supply tank is not empty or there hasn't been a utility interruption of natural gas. Also, check that a 'no heat' temperature is not selected.
Why is my GE GTX52EASPWB shaking or making noise?
Your GE Dryer may be shaking or making noise because it is sitting unevenly. To fix this, move the dryer to an even floor space, or adjust the leveling legs as necessary until it is stable.
Why does my GE Dryer take so long to dry clothes?
If your GE Dryer is taking too long to dry clothes, several factors could be at play. First, ensure the dryer venting is correctly installed, clean, free of kinks, and unobstructed, and that the outside wall damper operates easily. Separate heavy items from lightweight items. For large loads of heavy fabrics, divide them into smaller loads to speed up drying. Also, make sure your control settings match the load you're drying, and clean the lint filter before every load. Check for blown fuses or tripped circuit breakers, remembering some electric dryers use two fuses/breakers. Avoid overloading the dryer, and if drying only one or two items, add a few more to ensure proper tumbling.
What to do if my GE GTX52EASPWB Dryer doesn’t start?
If your GE Dryer isn't starting, ensure it's properly plugged into the outlet. Also, check your building’s fuse/circuit breaker box and replace any blown fuses or reset tripped breakers. Keep in mind that some electric dryers use two fuses or breakers, so make sure both are operating correctly.
Why are there greasy spots on clothes after drying in my GE GTX52EASPWB?
Greasy spots on clothes dried in your GE Dryer may be due to improper use of fabric softener, so follow the directions on the package. Ensure you're only drying clean items together, as drying dirty items with clean ones can cause stains. Sometimes stains that weren't visible when the clothes were wet appear after drying, so ensure clothes are completely clean before drying.
Why are drying times inconsistent with my GE GTX52EASPWB Dryer?
Inconsistent drying times can occur due to the type of heat used; drying time will vary according to the type of heat used. Also, the load size, types of fabric, wetness of clothes, and the length and condition of the exhaust system will affect drying times.
How to prevent clothes from shrinking in my GE GTX52EASPWB Dryer?
To avoid shrinkage when using your GE Dryer, carefully follow garment care labels. Some items may be pressed back into shape after drying. If you're concerned about shrinkage with a particular item, avoid machine washing or tumble drying it.
Why are there greasy spots on clothes after using my GE Dryer?
Greasy spots on clothes can be caused by improper use of fabric softener; follow the directions on the package. Also, avoid drying dirty items with clean ones, as dirty items can stain both the clean items and the dryer. Ensure clothes are completely clean by using proper washing procedures before drying.
General| Brand | GE |
|---|---|
| Model | GTX52EASPWB |
| Capacity | 7.2 cu. ft. |
| Color | White |
| Dryer Venting | Vented |
| Temperature Settings | 4 |
| Wrinkle Care Option | Yes |
| Energy Star Certified | No |
| Voltage | 240 V |
| Amperage | 30 A |
| Dryer Type | Electric |
| Weight | 120 lbs |
| Width | 27 inches |
| Height | 44 inches |
