GE HFW350 - User Manual

Questions and Answers

C
Candice LevineSep 4, 2025
How to get rid of bad odor inside GE HFW350 Washer?
- C
  Christian GloverSep 4, 2025
  To address a bad odor inside your GE Washer, regularly use ULTRAFRESH VENT between uses. If the odor is strong, run the Self Clean cycle more than once. Use only the recommended amount of HE detergent or adjust SmartDispense to LOW. Always remove wet items promptly after the washer stops or use 1 Step Wash + Dry or Tumble Care. If you choose not to use the ULTRAFRESH VENT System, leave the door slightly open for the washer to air dry, ensuring close supervision if children are nearby.
B
Bryan WardSep 3, 2025
Why are there colored spots on clothes from my GE HFW350 Washer?
- J
  James ParkerSep 3, 2025
  If you're noticing colored spots on clothes washed in your GE Washer, ensure you are using fabric softener correctly by checking the package instructions and following directions for using the dispenser. Also, sort whites or lightly colored items from dark colors to prevent dye transfer.
N
Nicole SimmonsSep 2, 2025
Why are my clothes grayed or yellowed after washing in my GE Washer?
- F
  Felicia MayoSep 3, 2025
  To address grayed or yellowed clothes from your GE Washer, use the correct amount of detergent, and ensure it is HE (high efficiency) detergent. If you have hard water, use the hottest water safe for the fabric. Make sure your water heater is delivering water at 120°–140°F (48°–60°C). If the detergent is not dissolving, try a liquid HE detergent. Sort clothes by color to prevent dye transfer; if a fabric label states to wash separately, unstable dyes may be indicated.
K
Kathleen JimenezSep 2, 2025
Why does my GE HFW350 Washer door unlock or not operate when I press Start?
- G
  grantvictoriaSep 2, 2025
  It's normal for front-load washers like your GE Washer to start up differently than top-load washers, taking several seconds to check the system, during which the door will lock and unlock. If the machine doesn’t operate after this, simply open and close the door firmly, then press Start.
A
Alexandra BlanchardSep 1, 2025
GE HFW350 has no power, what to do?
- L
  loganwilliamsSep 1, 2025
  If your GE Washer has no power or isn't working, first, ensure the power cord is securely plugged into a working outlet. Next, verify that both the hot and cold water faucets are fully turned on. Check your house circuit breakers or fuses and replace or reset them as needed, ensuring the washer has a separate outlet. Note that the first time the washer is plugged in, it performs automatic system checks, which may take up to 20 seconds before you can use it. This is normal.
C
Corey FullerAug 31, 2025
What to do if my GE HFW350 Washer has no power or is not working?
- M
  Michael DavisAug 31, 2025
  If your GE washer has no power or isn't working, try these steps: * Make sure the power cord is securely plugged into a working outlet. * Ensure both hot and cold water faucets are fully turned on. * Check the house circuit breakers or fuses. Replace fuses or reset the breaker. The washer should have a separate outlet. * If it's the first time the washer is plugged in, automatic system checks occur, which may take up to 20 seconds. This is normal.
I
Isaiah WagnerAug 30, 2025
Why is water not entering my GE HFW350 Washer or entering slowly?
- O
  ogeorgeAug 30, 2025
  If water isn't entering your GE washer or is entering slowly, the washer does several system checks after Start is pressed; water will flow a few seconds after pressing Start. Check if the water valve screens or inlet hose screen washers are stopped up; turn off the water source and clean the screens. Ensure fill hoses aren't kinked or clogged. Verify the water supply is turned on fully for both hot and cold faucets and that the faucets are completely open. The washer door must be closed for all cycle operations. Ensure the fill hoses connect the hot water supply to the hot inlet and the cold water supply to the cold inlet.
G
Garrett MunozAug 29, 2025
Why is my GE Washer making loud noises and vibrating?
- B
  Bryan WilsonAug 29, 2025
  If your GE washer is making loud or unusual noises, vibrating, or shaking, it is designed to move slightly (about 1/4 inch). Ensure all rubber leveling legs are firmly touching the floor; adjust them if the washer is uneven and lock them in place. An unbalanced load can also cause this issue; pause the unit, open the door, and manually redistribute the load. To check the machine, run a rinse and spin cycle with no load; if it runs normally, the unbalance was caused by the load.
C
christina91Aug 28, 2025
What to do if GE HFW350 Washer has no power or is not working?
- K
  Katie KennedyAug 28, 2025
  If your GE Washer has no power or isn't working, first, ensure the cord is securely plugged into a working outlet. Then, check that both hot and cold water faucets are fully turned on. Also, inspect your house's circuit breakers or fuses, replacing fuses or resetting the breaker as needed, ensuring the washer has a separate outlet. If it's the first time the washer is plugged in, automatic system checks occur, which may take up to 20 seconds before you can use the washer; this is normal.
P
phendersonAug 27, 2025
Why is my GE Washer not draining, spinning, or tumbling?
- P
  phillip36Aug 28, 2025
  If your GE Washer is not draining, spinning, or tumbling, it could be due to several reasons. First, the load might be unbalanced; try redistributing the clothes and running a Rinse & Spin cycle. If you're washing a small load with heavy and light items, increase the load size. Also, the pump filter might be clogged; refer to the Care and Cleaning section for instructions on cleaning it. Ensure the drain hose isn't kinked or that the washer isn't sitting on it, and check your household plumbing for clogs, calling a plumber if necessary. Finally, make sure the drain hose isn't siphoning by ensuring there's an air gap between the hose and drain and that it's not inserted more than 7 inches into the drain pipe.