Need help?Do you have a question about the GE Innova 4100-IQ and is the answer not in the manual?
General| Image Acquisition | Digital |
|---|---|
| Table Type | Floating table top |
| X-ray Tube Voltage | 40-125 kV |
| Generator Type | High-frequency generator |
| Digital Subtraction Angiography (DSA) | Yes |
| Roadmapping | Yes |
| Detector Type | Digital flat panel detector |
| X-ray Tube | Rotating anode X-ray tube |
| Imaging Modes | Fluoroscopy, Digital Radiography |
| Image Intensifier | N/A (Digital Flat Panel Detector) |
| Focal Spot Size | 0.6 mm |
| System Dimensions | Varies depending on configuration |
| Power Requirements | 3-phase, 50/60 Hz |
| Patient Weight Capacity | 204 kg (450 lbs) |
| Table Movement | Longitudinal, lateral, and vertical movement |
| Compatibility | DICOM compatible |
| Cooling System | Liquid cooling system |
| 3D Imaging Capability | Optional 3D rotational angiography |
| Installation Requirements | Dedicated room with radiation shielding, 3-phase power, climate control |
Outlines the steps and information flow for the pre-installation process, including checklists.
Describes the Innova LC positioner and various patient tables (Omega, InnovaIQ).
Details the X-ray generator, head components, and mandatory chiller.
Details room presentation, environmental limits, heat output, and classifications.
Outlines compliance with IEC60601-1-2 EMC standards for emissions and immunity.
Specifies room size, door requirements, floor preparation, and seismic considerations.
Details power line, three-phase, and voltage requirements for system components.
Details floor loading, mounting methods, and base plate requirements.
Explains grounding requirements and provides interconnect diagrams.
Details facility power requirements, grounding points, and procedures.
Provides seismic calculations for various components like cabinets and chillers.
To Next Page
