Need help?Do you have a question about the GE Innova 2000 and is the answer not in the manual?
General| X-ray Generator | High-frequency generator |
|---|---|
| Image Acquisition | Digital |
| Detector Type | Digital flat panel detector |
| Frame Rate | Up to 30 frames per second |
| Weight | Approximately 1200 kg |
Overview of Innova 2000 system parts: positioner, patient table, X-ray generator, etc.
Details site preparation steps and information flow required before system installation.
Cross-reference tables for Innova LC positioner and Omega tables sub-system compatibility.
Specifies room climate, humidity, and temperature requirements for system components.
Covers room size, door dimensions, and floor specifications for equipment installation.
Details system line voltage, phases, current, frequency, and essential grounding specifications.
Provides detailed dimensional drawings for system components and their relative positions.
Specifies floor loading, weights, and recommended mounting methods for system components.
Discusses radiation protection, service access, and clinical access requirements for room setup.
Addresses system failures and main power supply interruptions, including recovery steps.
Lists all required tools and test equipment for system installation and calibration.
Guides the process of surveying the delivery route for equipment transport and site access.
Verifies site readiness and customer information using a comprehensive checklist.
Provides contact information for obtaining IP addresses from GEM service centers globally.
To Next Page
