Why aren't the clock and timer working on my GE JBS65?
If your GE Ranges clock and timer aren't working, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, make sure the electrical plug is plugged into a live, properly grounded outlet.
Why is my GE Ranges cooktop discolored?
If you see areas of discoloration on your GE Ranges cooktop, this can happen when food spillovers aren't cleaned before the next use. Also, on light-colored cooktops, the surface may appear discolored when hot, which is temporary and disappears as the glass cools.
Why is "LOCK DOOR" flashing in the display of my GE Ranges?
The "LOCK DOOR" message flashes on your GE Ranges display because the self-clean cycle has been selected, but the oven door is not fully closed. Make sure to close the oven door and latch it to start the cleaning cycle.
What to do if the DOOR LOCK light is on when I want to cook with my GE JBS65 Ranges?
If the DOOR LOCK light is on when you want to cook with your GE Ranges, it means the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool down.
Why is my GE JBS65 Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, it may need adjustment. See the Special Features section for instructions on how to adjust the oven temperature.
Why won't my GE Ranges oven self-clean?
If your GE Ranges oven will not self-clean, allow the oven to cool and reset the controls.
Why are there control signals after entering cooking time or start time on my GE JBS65 Ranges?
If you're getting control signals after entering cooking time or start time on your GE Ranges, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature, or the Self Clean pad and desired clean time.
Why is there steam from the vent of my GE JBS65 Ranges?
It is normal to see steam coming out of the oven vents of your GE Ranges when using the ovens. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal.
Why does my GE Ranges oven take longer to preheat to the same temperature?
If your GE Ranges oven sometimes takes longer to preheat to the same temperature, it could be due to cookware or food in the oven; removing these items will reduce preheat time. The number of racks in the oven can also affect preheating, so removing some racks may help. Additionally, different cooking modes use different preheat methods, with some modes taking longer than others (e.g., convection bake).
Why does my GE Ranges oven light not work?
If the oven light in your GE Ranges isn't working, the bulb might be loose or defective. Try tightening or replacing the bulb. If the pad operating the light is broken, call for service.
General| Type | Freestanding |
|---|---|
| Fuel Type | Electric |
| Oven Capacity | 5.3 cu. ft. |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Convection | No |
| Ignition Type | Electronic |
| Width | 30 in |
| Color | Stainless Steel |
To Next Page
