Why is my GE Ranges display blank?
If the display on your GE Ranges goes blank, it could be due to a blown fuse or tripped circuit breaker in your home. Replace the fuse or reset the circuit breaker. It's also possible that the clock is turned off (see the Special features section) or that the oven is in Sabbath Mode (verify in the Special Features section).
Why is my GE JBS65 Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, it may need adjustment. See the Special Features section for instructions on how to adjust the oven temperature.
What to do if the DOOR LOCK light is on when I want to cook with my GE JBS65 Ranges?
If the DOOR LOCK light is on when you want to cook with your GE Ranges, it means the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool down.
Why is "LOCK DOOR" flashing in the display of my GE Ranges?
The "LOCK DOOR" message flashes on your GE Ranges display because the self-clean cycle has been selected, but the oven door is not fully closed. Make sure to close the oven door and latch it to start the cleaning cycle.
Why is my GE JBS65 oven not working?
If your GE Ranges oven is not working or appears not to work, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, verify that the oven is not in Sabbath Mode.
Why does my GE Ranges oven light not work?
If the oven light in your GE Ranges isn't working, the bulb might be loose or defective. Try tightening or replacing the bulb. If the pad operating the light is broken, call for service.
Why is my GE JBS65 oven not clean after self-cleaning?
If your GE Ranges oven is not clean after a clean cycle, clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
Why won't my GE JBS65 oven steam clean?
If your GE Ranges oven will not steam clean and the display flashes HOT, allow the oven to cool to room temperature before resetting the controls. Also, make sure you close the door to start steam clean cycle.
What to do if surface units on my GE JBS65 Ranges do not work?
If the surface units on your GE Ranges aren't working correctly, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, verify that the cooktop controls are correctly set for the surface unit you're using.
What to do if my GE JBS65 oven will not steam clean?
If your GE Ranges oven will not steam clean, and the display flashes HOT, allow the oven to cool to room temperature and reset the controls. Also, ensure the oven controls are properly set. See the Using Steam Clean section. Make sure you close the door to start steam clean cycle.
General| Type | Freestanding |
|---|---|
| Fuel Type | Electric |
| Oven Capacity | 5.3 cu. ft. |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Convection | No |
| Ignition Type | Electronic |
| Width | 30 in |
| Color | Stainless Steel |
To Next Page
