COOKING BY TIME
Micro Cook I
Micro Cook allows you to microwave for a preset
Because automatic Power Level 10 is recommended
amount of time.
for this
cup of coffee, there is no need to change the
Power Level 10 (High) is recommended for most
power level. (If Power Level 10 is not appropriate,
cooking, but you may change this for more flexibility.
see “How to Change Power Level” below.)
See the Cooking Guide.
o
Step
4: Touch START.
To become better acquainted with time cooking, make
START
a cup of coffee by following the steps below.
Step 1: Fill a cup 2/3 full of
Step 5: When time is up, the oven signals and flashes
water, add
1
teaspoon of
“End”. The oven, light and fan shut off.
instant coffee and stir to
dissolve. Use a cup that has
Step 6: Open the door.
no metal decoration and is
If you interrupt Micro Cook to check the food, simply
microwave-safe (refer to
close the door and press START to resume cooking.
Microwaving Tim section).
If there is not time remaining on the timer you must
Place cup
in&e~
and
close
door.
reset the timer to resume cooking.
MICRO
COOK
A
Step 2: Touch MICRO COOK.
Step 3: Select your time. Touch pad 1 and MINUTE
pad for
1
minute.
How to Change Power Level When Setting
Micro Cook I
1. Press MICRO COOK. ,
*
~
~
~
-,..
-.
-.
—.
-..
2. Select cooking time.
6 1
B
9
-0-
3. Press POWER LEVEL.
4. Select desired power level 1–10.
5. Press START.
Using the Micro Cook 11 Feature
The Micro Cook II feature lets you set 2 time cooking
functions within one program. This is ideal if you
want to change power levels during your cooking
operations. Here’s how to do it.
Step 1: Place the food in the oven in a
rnicrowave-
safe container and close the door.
17
Step 2: Touch MICRO COOK.
MICRO
COOK
~
Step 3: Select your first cook time. For example,
touch 2,
1
and 5 for 2 minutes and 15 seconds.
Step 4: Now is the time to change the power level if
you don’t want
full
power for MICRO COOK. (Press
POWER LEVEL. Select desired power level 1–10.)
Step 5: Touch MICRO COOK again.
Step 6: Set your second cook time.
Step 7: Change the power level for MICRO
COOK. (Press POWER LEVEL. Select desired
power level 1-10.)
n
steP8’
PKSSS
TART
u
START
The microwave oven will start and the time set for
“COOK TIME I“ will count down. Also, “POWER
10” or the power level selected for “COOK TIME I“
will be displayed.
At the end of “COOK TIME I“, the second power
level is displayed and the time for “COOK TIME II”
is shown counting down.
When time is up, the oven signals and flashes “End”.
The oven, light and fan shut off. Open the door.
If you interrupt Micro Cook to check the food, simply
close the door and press START to resume cooking.
If there is no time remaining on the timer you must
reset the timer to resume cooking.
11
To Next Page
Loading...
Need help?
General
