GE JEB1050 User Manual

OVEN LIGHT REPLACEMENT
Oven Light
To replace your
oven light, first
disconnect
power at main
fuse or circuit
breaker panel
or pull plug.
Step 1: Open
the oven door.
Step 2: Remove the front grille by taking out the
2 screws that hold it in place.
Step
3: Rotate
the light bulb
housing out
and toward
you to access
the light bulb.
Replace the
burned-out
bulb with a
40-watt incandescent bulb (WB02X4253) available
from your GE supplier.
Reverse Step 2 and Step 3 to replace the grille,
while making sure the grille is flush against the
control panel.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
In the event of an electrical short
circuit, grounding reduces the risk
of electric shock by providing an
:scape wire for the electric current.
This appliance is equipped with a
power cord having a grounding
wire with a grounding plug. The
plug must be plugged into an outlet
that is properly installed and
grounded. (Fig. 1)
WA~lNG–Improper
use of the grounding plug ~an’
result in a risk of electric shock.
Ensure prop_er ground
Fig. 1 exists before use
Consult a qualified electrician or
service technician if the grounding
instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly
grounded.
Where a standard 2-prong wall
receptacle is encountered, it is
your personal responsibility and
obligation to have it replaced with
a properly grounded 3-prong wall
receptacle.
Do not under any circumstance
cut or remove the third (ground)
prong from the power cord.
Do not use an adapter plug with
this appliance.
Do not use an extension cord
with this appliance.
25
—

GE JEB1050 Specifications

General

Brand	GE
Model	JEB1050
Category	Microwave Oven
Language	English