GE JGB720SEJSS

Other manuals for GE JGB720SEJSS

Questions and Answers:

S
Steven WallaceAug 16, 2025
What to do if the surface burners on my GE JGB720SEJSS Ranges do not light?
- R
  Robert FrostAug 17, 2025
  If the surface burners on your GE Range won't light, ensure the electrical plug is fully inserted into a properly grounded outlet. Also, check that the gas supply is connected and turned on. A blown fuse or tripped circuit breaker could also be the cause; replace the fuse or reset the breaker. Incorrectly replaced burner parts or clogged burner slots can also prevent lighting. Refer to the Care and Cleaning section for how to properly replace burner parts or remove the burners for cleaning.
M
Michael DixonAug 19, 2025
What to do if my GE Ranges display appears not to work?
- D
  Dr. Charles Mills MDAug 19, 2025
  If your GE Range display appears not to work, a fuse in your home may be blown, or the circuit breaker tripped; replace the fuse or reset the breaker. Ensure the oven controls are set correctly. Verify that the oven is not in Sabbath Mode. Also, check if the clock is turned off.
J
Jessica MayAug 22, 2025
Why is there a strong burning or oily odor from my new GE Ranges?
- D
  Daniel ScottAug 22, 2025
  This is normal for a new GE Range and will go away over time. To make it go away faster, you can set a self-clean cycle for at least 3 hours.
C
Christina RobertsAug 25, 2025
What to do if my GE Ranges oven is not clean after the cleaning cycle?
- R
  randyhayesAug 26, 2025
  If your GE Range's oven is not clean after a clean cycle, it could be due to improperly set oven controls. You should also clean up any significant spills before starting the cleaning cycle. Ovens that are very dirty may need to self-clean again or for a longer time.
K
Kelly AndersonAug 28, 2025
What to do if food does not broil properly in my GE Ranges?
- J
  Jonathan WallaceAug 28, 2025
  If food does not broil properly in your GE Range, ensure you've selected the correct broil mode. Check the Cooking Guide for the appropriate broil mode. Also, make sure you're using the correct rack position, as suggested in the Cooking Guide. Use cookware specifically designed for broiling. If using aluminum foil on the broil pan, make sure it's wrapped tightly and has slits to allow grease to drain.
B
brooksandreAug 30, 2025
How to fix GE JGB720SEJSS top burners that do not burn evenly?
- J
  jessica79Aug 30, 2025
  If the top burners on your GE Range don't burn evenly, it might be due to improper burner assembly. Make sure the burner caps are seated correctly. Also, the burner slots on the side of the burner may be clogged. Remove the burners for cleaning.
D
Daniel MontgomerySep 2, 2025
How to fix GE Ranges oven light that does not work?
- J
  Joan ThomasSep 2, 2025
  If the oven light in your GE Range isn't working, the light bulb may be loose or defective. Try tightening or replacing the bulb. Refer to the Maintenance section for instructions on how to replace the bulb.
A
Alyssa WigginsSep 4, 2025
Why will my GE JGB720SEJSS not self-clean?
- C
  Carly DouglasSep 5, 2025
  If your GE Range won't self-clean, it could be because the temperature is too high. Allow the oven to cool down. Also, make sure the oven controls are set correctly.
D
dorseyrobertSep 7, 2025
What to do if the drawer on my GE JGB720SEJSS Ranges does not slide smoothly?
- K
  Kimberly NelsonSep 8, 2025
  If your GE Range's drawer doesn't slide smoothly or drags, the drawer might be out of alignment. Fully extend the drawer and push it all the way in. The drawer could also be overloaded or unbalanced. Try reducing the weight or redistributing the contents.
B
bartlettderrickSep 12, 2025
What to do if food does not bake properly in my GE Ranges?
- W
  wpetersSep 12, 2025
  If food does not bake properly in your GE Range, the oven controls might be set incorrectly. The rack position could also be incorrect, so consult the Cooking Guide. Make sure the rack is level; see the Installation Instructions for leveling directions.