GE JK1000 User Manual

L9
Z
!
Z
<I:
LU
..J
L)
a
Z
<1:
LIJ
L)
Maintenance
Oven Light Bulb
iAWARNING
SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical
power to the oven at the main fuse or circuit breaker panel. Failure to do so may result in
electric shock or burn.
iA CAUTION
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot
glass with bare hands or a damp cloth can cause burns.
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
Before replacing the bulb, disconnect electrical power to
the oven at the main fuse or circuit breaker panel. Let
the bulb cool completely before removing it. For your
safety do not touch a hot bulb with a damp cloth. If you
do the bulb may break.
To remove:
Turn the glass cover counterclockwise 1/4 turn until the
tabs of the glass cover clear the grooves of the socket.
Remove the bulb.
To replace:
Put in a new 40-watt appliance bulb. Place the tabs of
the glass cover into the grooves of the socket. Turn the
glass cover clockwise 1/4 turn.
NOTE:
[] A 40-watt appliance bulb is smaller than a standard
40-watt household bulb.
[] Reconnect electrical power to the oven once the new
bulb is installed.
[] For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be
done when the oven is completely cool.
31/2"
Hax
length
, Bulb
i
Gloss cover
Socket
q 2 _49 80723

GE JK1000 Specifications

General

Brand	GE
Model	JK1000
Category	Oven
Language	English