GE JKP15 - Self-Cleaning Oven Safety

5
Cutouts for Single Built-In-Oven
A1
Installation Instructions
Cabinet Width 27
Recommended
Cutout Location
from Floor 32 1/2”
Cutout Depth 23 1/2”
Cutout Width 25” Min.
25 1/4” Max.
Cutout Height 27 5/8” Min.
28 1/8” Max.
If the cabinets do not have a solid
bottom, then two braces or runners
must be installed to support the
weight of the oven. For single
ovens the runners and braces must
support 150 pounds.
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4” thick,
shim both sides equally to
establish the cutout width.
This Oven is not approved for stackable
or side by side installation
18"
27"
24"
2" x 4" or
Equivalent
Runners
Cutout
Width
25" MIN.
25 1/4" MAX.
5"
Junction Box
Location
22" Min.
above base
rail
10"
Cabinet
Width
27"
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls, etc.
when door is open
Allow 7/8"
for overlap of
oven over side
edges of cutout
Allow 1" for
overlap of oven
top and bottom
of cutout
Recommended
cutout location
from floor
32 1/2"
20"
2" x 4" or
equivalent
runners
Alternate
junction box
location
Cutout
Height
27 5/8" MIN.
28 1/8" MAX.