GE JP938 User Manual

– 4 –
Grounding Specifications
Ground Path Resistance 0.10 ohms Max.
Insulation Resistance 250K ohms Min.
Power Supply Requirements
The cooktop must be connected to a supply
circuit of the proper voltage and frequency as
specified on the rating plate. The rating plate is
located on the side of the component box. Wire
size must conform to the National Electrical
Code or the prevailing local code.
Overcurrent Protection for
Counter-Mounted Cooktops
208V 236V 240V
4.2 4.7 4.8
6.2 7.1 7.2
7.3 8.3 8.4
8.3 9.4 9.6
10.4 12.0
MAXIMUM KILOWATT RATING
NEC RATING
11.8
20 Amp
30 Amp
35 Amp
40 Amp
50 Amp
GEA00794
The branch circuit load for one counter-
mounted cooktop is the rating on the name-
plate of the appliance. The branch circuit load
for a counter-mounted cooktop and not more
than two wall-mounted ovens – all supplied from
a single branch circuit and located in the same
room – shall be computed by adding the name-
plate ratings on the individual appliances and
treating this total as equivalent to one range.
Wiring
Built-in power leads are U.L. approved for con-
nection to larger gauge household wiring. The
insulation of these leads is rated at temperatures
much higher than the temperature rating of house-
hold wiring. The current carrying capacity of a
conductor is governed by the temperature rating
of the insulation around the wire rather than the
wire gauge alone.
WARNING: Improper connection of aluminum
house wiring to these copper leads can result in a
serious problem. Use only connectors designed
for joining copper to aluminum and follow the
manufacturer’s recommended procedure closely.

GE JP938 Specifications

General

Brand	GE
Model	JP938
Category	Cooktop
Language	English