Why is my GE JT5500 Oven not baking food properly?
Improper baking can occur due to several reasons: * Oven controls may be improperly set. * The rack position might be incorrect or not level. * You might be using incorrect cookware or cookware of an improper size. * The oven temperature may need adjustment. * Substituting ingredients can also change the recipe outcome.
What to do if my GE JT5500 will not self-clean?
If your GE oven will not self-clean, the temperature might be too high to set a self-clean operation. Allow the oven to cool and reset the controls. Also, make sure the oven controls are properly set (see the Cleaning the Oven section).
What to do if my GE JT5500 Oven door will not open after a clean cycle?
If your GE oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature.
Why is 'LOCK DOOR' flashing on my GE JT5500 display?
The 'LOCK DOOR' message flashes on the display because the self-clean cycle has been selected, but the oven door is not closed. Ensure the oven door is fully closed.
What to do if my GE Oven temperature is too hot or too cold?
If your GE oven temperature is too hot or too cold, the oven temperature may need adjustment. See the Special Features section for instructions.
General| Brand | GE |
|---|---|
| Model | JT5500 |
| Oven Type | Single |
| Fuel Type | Electric |
| Oven Capacity | 5.0 cu. ft. |
| Number of Ovens | 1 |
| Number of Oven Racks | 2 |
| Self-Cleaning | Yes |
| Convection Cooking | Yes |
| Broiler | Yes |
| Bake Element Wattage | 2500 W |
| Clock Type | Digital |
| Timer | Yes |
| Control Lock | Yes |
| Control Type | Touch |
| Broil Element Wattage | 3600 Watts |
| Color | Stainless Steel |
| Cooktop Surface | Ceramic Glass |
To Next Page
