11
LED LIGHT-ON TIME SETTING
The LED light fixture has an adjustable time setting
that determines the length of time the LED lights will
remain on after motion is detected. You can adjust
the light-on time from 1 minute to 10 minutes.
Adjust the ‘Time’ setting from ‘Test’ position from 1
to10 minutes as desired. Note: In the ‘TEST’ setting,
the lights will turn on for 5 seconds after motion is
detected and then turn off, and will turn on during
daylight.
HOW DOES MOTION DETECTION WORK?
Motion sensors are actually heat sensors. Motion Sensors detect motion by
monitoring changes in heat within the detection area. As a person enters the
detection area, the sensor compares the outside temperature with the body
temperature of the person within the detection area. As the person moves
within the detection area, the heat measurements change. Motion Sensors
determine these changes to be ‘movement’. All motion sensors are more
sensitive to movement across the detection area, and less sensitive to
movement toward the sensor. The Motion Sensor on the GE LED Security
Light is designed to detect motion up to 180°, and outward from the fixture
from 6ft up to 60ft.
Time
To Next Page
Loading...
