GE LightSpeed 16 - Host Computer

g
Product Data Sheet – rev 4.2
July 4th 2003
Page 14
LightSpeed
16
With Xtream
CT Scanner System
GE Medical Systems-America
Milwaukee, USA - Fax: 1 414 544 3384
GE Medical Systems-Asia:
Tokyo, Japan - Fax: 81 425 85 5490
Hong Kong - Fax: 852 2559 3588
GE Medical Systems-Europe
Peripherals:
•
Heat Storage Capacity: 6.3 MHU • 16 x 1.25 mm (uses all 24 rows)
• 16 x 0.625 mm (uses center 16 rows )
• Heat Dissipation:
Total of 254 GB system:
• Anode (max) 840 KHU/min
70% geometric efficiency; 98% absorption
efficiency.
• Casing (cont) 300 KHU/min
• Main system (host) disk drive:
• Tube Unit: 6.9 kW continuous for 10
minutes
• High Performance Drive
Data Acquisition System
• 36 GB, 3.5 inch form factor
• Dual Focal Spots:
• 15,000 RPM
• Small Focal Spot:
12,288 available input channels.
• Ultra320 SCSI interface
0.7 mm (W) x 0.6 mm (L) nominal
value
(IEC 336/93)
• Assigned to applications software and
image files
1,640 Hz maximum sample rate.
Effective analog to digital conversion range
greater than two million to one.
• 2 system disk drives (Image Disk)
0.9 mm (W) x 0.7 mm (L) traditional
methodology
• High Performance Drive
• 73 GB, 3.5 inch form factor each.
Scan/Control Unit
• 15,000 RPM
•
Large Focal Spot:
0.9 mm (W) x 0.9 mm (L) nominal
value
(IEC 336/93)
• Ultra320 SCSI interface
Located in base of Operator Console.
• Assigned to image files only
- 250,000 uncompressed 512 images
1.2 mm (W) x 1.2 mm (L)
traditional methodology
• Scan data disk drive:
Host Computer
• High Performance Drive
• 36 GB, 3.5 inch form factor
• Maximum Power: 53.2 kW
• Dual SMP 2.66.GHz Intel Xeon processors
with 512KB L2 cache.
• UltraSCSI interface
• Beam collimated to 55° fan angle.
• Intel Hyper-threading technology.
• Scan data disk drive:
Average time to replace tube: <
10 hours
• High Performance Drive
• 2GB DDR266 Dual Channel Memory with a
throughput of 4.2GB/sec
• 36 GB, 3.5 inch form factor
High Voltage Generation
• UltraSCSI interface
Image Processor:
• High-frequency on-board generator.
Continuous operation during scan.
• Standard MOD drive:
• Nvidia Quadro4 980XGL AGP 8X graphics
with 128MB Memory
• Magnetic Optical Disk Drive
• 53.2 kW output power.
• Erasable, rewritable media
• kVp: 80, 100, 120, 140
• Graphics Processor Unit (GPU) Clock
300Mhz
• 2.3 GB, 3.5 inch form factor
• mA: 10 to 440 mA, 5 mA increments
• Assigned to DICOM 3.0 format image
file.
• Graphics Memory Clock 325Mhz
Maximum mA for each kVp selection:
• Stores 4,700 lossless JPEG compressed
512 image files per side
Image Reconstruction Engine
(GRE)
KVp Max mA
80 400
100 420
120 440
140 380
• Off-line retrieval of image. Images may
be viewed as soon as they are restored
from MOD
•
Custom-designed special purpose
CT Image Generator
• DVD Ram:
• Custom CT back projection hardware
accelerates 2D & 3D back projection.
• 4.7 GB per side, 5.25" half height form
factor
HiLight Matrix II Detector:
• Intel Hyper-threading Technology.
• Transfer rate 2.7MB/sec
•
32-bit floating point data format
• Assigned to scan data file and protocol
file storage/retrieval.
21,888 individual elements composed by: 8
rows of 1.25 mm thickness and 16 rows of
0.625 mm thickness, each containing 888
active patient elements; 24 reference
elements.
•
2GB DDR226 ECC Dual Channel
Memory Standard (4.2 GB/sec).
• Color monitors:
Software Architecture:
• 21 inch diagonal width
4 typical modes of data output:
• 1280 x 1024 dot resolution
• Software architecture based on industry
standards and client-server design
• 8 x 1.25 mm (uses center 16 rows)
• Non-interlaced, flicker-free presentation
• 8 x 2.5 mm (uses all 24 rows)
• 76 kHz Horizontal deflection frequency
* Option