Need help?Do you have a question about the GE RX3i PROFINET and is the answer not in the manual?
Details changes and updates made to the manual across different revisions.
Outlines the technical specifications of the RX3i PROFINET Scanner module.
Describes the physical controls, LEDs, ports, and indicators on the scanner module.
Explains PROFINET communication principles and controller interactions.
Discusses PROFINET Media Redundancy Protocol and its applications.
Details the system limitations and supported configurations for the scanner.
Lists compatible modules, power supplies, and backplanes for the RX3i system.
Provides definitions for key terms and acronyms used in the manual.
Lists related GE manuals and documentation resources for further information.
Explains the meaning and operational status of all LEDs on the PROFINET Scanner.
Details the four external Ethernet ports, including RJ45 and SFP cage types.
Describes the function and usage of the SD card slot for data transfer.
Explains the USB port's purpose for firmware updates and driver installation.
Provides essential checks and procedures before installing the equipment.
Covers safety warnings and procedures for installing equipment in hazardous locations.
Guides users through the physical installation and removal of modules from the rack.
Provides methods for replacing a PROFINET Scanner module using SD Card or DCP Tool.
Covers SFP modules, VLAN settings, USB driver, and firmware updates.
Outlines the basic configuration steps and available configuration tools.
Details adding IO-Devices, configuring scanners, and adding modules to a PROFINET LAN.
Explains how to assign device names, including using an SD Card for transfer.
Describes actions after configuration data is stored to the PROFINET Controller.
Explains the module's behavior and LED indications during power-up.
Covers I/O scanning, data coherency, sampling rates, and output control.
Details the procedure and consequences of hot swapping I/O modules.
Identifies and explains configuration mismatches and faults detected by the scanner.
Explains how to access and interpret PROFINET identification and maintenance data.
Describes fatal errors, their indications, and the actions to take.
Provides guidance and suggestions for troubleshooting connection issues.
Lists the PROFINET protocols and features supported by the scanner.
Presents key technical data points for the PROFINET scanner.
Lists features not supported in the current release of the PROFINET scanner.
To Next Page
General
