GE RX3i PROFINET - Revisions in this Manual

Chapter 1. Introduction
GFK-2737F December 2016 3
1.1 Revisions in this Manual
Rev
Date
Description
F
Dec-
2016
• Updates for CPE400 (new related product).
• Updated list of supported I/O Modules in Section 1.7 per GFK-2738L
• Added footnotes tracking PNS firmware support for various I/O modules.
• Added footnotes tracking PNS firmware support for various features, such as HART Pass
Through.
• Added note on support for Remote Get HART Device Information COMMREQ.
E
Apr-
2015
In Section 1.7, corrected data for IC695SPF010 in table
D
May-
2014
 In Section 4.2.5, Configuring Module Parameters, added Universal Analog Input Module and
Power Sync and Measurement Module and related rules to the table,
 In Section 4.2.5.1, RX3i PROFINET Scanner Configuration Validation, added IC695ALG600 to the
table.