g
Product Data Sheet – rev 4.2
July 4th 2003
Page 16
LightSpeed
With Xtream
CT Scanner System
GE Medical Systems-America
Milwaukee, USA - Fax: 1 414 544 3384
GE Medical Systems-Asia:
Tokyo, Japan - Fax: 81 425 85 5490
Hong Kong - Fax: 852 2559 3588
GE Medical Systems-Europe
Minimum Allowance
Subsystem Watts BTU/hr
Gantry 5,440 18,600**
Table 200 700
PDU 1,000 3,400
Operator
Console
2,165 7,400
Optional Laser
Camera
800 2,730
Recommended cooling values should not be
used for calculating system input power
requirements.
** Recommended Allowance: 7,150/24,400
Growth Allowance: 9,200/31,400
System Components Dimensions
mm inches
Gantry:
Width: 2,230 87.6
Depth: 1,007 39.6
Height: 1,887 74.1
Table:
Width: 610 24
Length: 5,050 199
Height: 1,120 44
Power Distribution Unit:
Width: 762 30
Depth: 585 23
Height: 1,270 50
Operator Console:
Width: 1,238 48.7
Depth: 1,288 50.7
Height: 1,257 49.5
Warranty
The published Company warranty in effect on
the date of shipment shall apply. The
Company reserves the right to make changes.
All specifications are subject to change.
Regulatory Compliance
This product is designed to comply with
applicable standards under the Radiation
Control for Health and Safety Act of 1968.
Laser alignment devices contained within this
product are appropriately labeled according to
the requirements of the Center for Devices
and Radiological Health.
This product is a CE-compliant device which
satisfies regulations regarding Electro-
Magnetic Compatibility (EMC) and Electro-
Magnetic Interference (EMI), pursuant to IEC-
601.
* Option
To Next Page
Loading...
