GE LOGIQ e R7 Series User Manual

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
7-22 Section 7-7 - Network and Insite II Configuration
7-7-2 Insite II Configuration (cont’d)
10.)Change to Diagnostics
page. Enable Disruptive Mode at Service side by pressing Yes.
11.)Customer will receive a request of Service side, click Yes to accept.
Figure 7-23 Enable Disruptive Mode
Figure 7-24 Accept requirement of Service

GE LOGIQ e R7 Series Specifications

General

Brand	GE
Model	LOGIQ e R7 Series
Category	Medical Equipment
Language	English