GE MAC 1200 ST

9-10 MAC 1200 resting ECG analysis system Revision D
2012250-095
Specifications: Basic Information
Mains Operation
 Instrument design in protection class I according to IEC 601-1
 Rated voltage range: 95 to 240 V
 Operating voltage range: 85 to 264 V,
49 to 65 Hz
 Rated current: 0.2 ... 0.6 A
Fuse: 2 x T 1.25 A, 5 x 20
 Typical power consumption:
Battery charging: 14 W
 Maximum power consumption: 29 W
Battery Operation
 Type: nickel-cadmium
 Rated battery voltage: 18 V
 Rated battery capacity: 1.3 Ah
 Fully charged battery sufficient for up to 50 12 Lead Mode, 1-page ECGs, if
unit is only switched on to record the ECGs
 Battery charge time: approximately 4 hours
(Minimum charge time for one 12 Lead Mode
ECG: 10 minutes)
 Battery life: approximately 2 to 3 years, replacement by service only
 Lithium battery for built-in clock, battery life: approximately 5 years,
replacement by service only
Operational Readiness
After successful self-test, approximately 20 seconds after power-up
Operating Position
Horizontal