GE GEH-ECG 1200 User Manual

GE Healthcare
GEH-ECG 1200
User Guide
2102322-111 REV 1
NOTE: The information in this manual only applies to the product GEH-ECG 1200. Due to continuing
product innovation, specifications in this manual are subject to change without notice.
© 2019 General Electric Company. All rights reserved

GE GEH-ECG 1200 Specifications

General

Type	Electrocardiograph
Channels	12
ECG Channels	12
Display	LCD
Printing	Thermal printer
ECG Analysis	Yes
Power Supply	AC
Dimensions	360mm x 290mm x 150mm
Storage	Internal memory

Summary

Symbols and Device Labels

Hazard and Information Symbols

Symbols indicating warnings, cautions, and important notes for safe operation.

Device Identification and Certification Labels

Labels identifying the device, its manufacturer, serial number, and regulatory certifications like CE.

Warning and Precautions

Electrosurgery and Leadwire Safety

Hazards related to electrosurgery and potential strangulation from leadwires.

Patient Safety and Device Hazards

General patient safety, explosion hazards, defibrillation precautions, and infection risks.

Operational and Interference Precautions

Guidance on interpretation, magnetic/electrical interference, and proper operator training.

Device Usage and Maintenance Precautions

Precautions for using other devices, handling recordings, battery leakage, and accessories.

Controls and Indicators

Patient Unit Controls and Indicators

Identifies buttons and indicators on the patient acquisition unit (1200W).

Receiver Unit Controls and Indicators

Identifies indicators and outputs on the receiver unit (1200WR).

Wireless Operation and FCC Compliance

Cautions on pacemaker interference, optimal wireless performance, and FCC compliance.

Battery Assembly

Battery Installation Procedure

Step-by-step guide for inserting and securing batteries into the device.

Battery Usage and Disposal Cautions

Important notes on battery handling, charging rechargeable batteries, and proper disposal.

Belt Strap Assembly

Electrode Application

Electrode Selection and Skin Preparation

Guidance on choosing suitable ECG electrodes and preparing the patient's skin for optimal contact.

Patient Leadwires Assembly

Attaching and Connecting Leadwires

Procedure for attaching electrodes to the patient and connecting leadwires to the device.

Leadwire Handling and Safety

Precautions for handling leadwires to prevent damage, injury, or poor recording quality.

Maintenance and Cleaning

Cleaning Procedures and Cautions

Instructions for cleaning the recorder and lead wires, including chemical use precautions.

Storage

Storage Conditions and Precautions

Guidelines for storing the recorder, including environmental conditions and battery removal.

Service and Troubleshooting

Service and Repair Procedures

Information on obtaining service, product returns, and authorized repairs.

Common Troubleshooting Solutions

Guidance on diagnosing and resolving common issues like power failure or signal artifacts.

ECG Cables and Accessories

Technical Specifications

1200W Acquisition Unit Specifications

Detailed technical specifications for the 1200W acquisition unit, including ECG and communication parameters.

1200WR Receiver Unit Specifications

Detailed technical specifications for the 1200WR receiver unit, including power, mechanical, and environmental data.

Electromagnetic Emissions and Immunity

Emissions and Immunity Compliance

Information on the device's compliance with electromagnetic emissions and immunity standards.

Recommended Separation Distances

Guidance on maintaining safe distances from RF communications equipment to prevent interference.