Battery Assembly
2102322-111 REV 1 Page 7
Battery Assembly
(1) Insert the first battery and slide it to the right.
(2) Insert the second battery and push it to the left and down with the same movement.
(3) Place the battery cover.
(4) Push battery cover down until get click.
!
Caution
• Do not leave battery in the recorder for extended periods (more than two weeks) when the recorder
is not in use.
• If you use rechargeable batteries, the battery recharger should be kept out of the patient
environment and hook-up area.
• Dispose of used batteries carefully, using environmentally friendly methods wherever possible
following the state’s recycling laws or your facility’s recycling policy
• Use only the recommended battery type as instructed in the technical specifications to operate the
1200W device (AA size Alkaline or NiMH rechargeable batteries).
• Do not use batteries with expired dates.
To Next Page
Loading...
