GE MAC 1200 ST

3-8 MAC 1200 resting ECG analysis system Revision D
2012250-095
System Test Function: Test Results
Test Results
Pressing the 4 key triggers the output of the test results.
The output of the test protocol supplies the following information.
 Time and date
 Device serial number
 Device model
 Software release
 ECG time constant
 Battery voltage
 Test results
 Memory used (ROM, RAM)
 Base address
 Size
Following output, the initial display menu reappears automatically.
The identification of the Hardware Version is given by the item “Remote Control
yes/no”.
“No” indicates Hardware Version V 1.0 (no remote control), “yes” indicates
Hardware Version V1.1 or V1.2.