MDS 05-7280A01, Rev. A MDS TransNEXT Technical Manual 31
cfg import <Paste> in a configuration
>setup help
chan Get/Set setup channel [0-127] f_MHz=902.2+(.2*chan)
key Continuous TX key
burst Burst TX key
dkey Key down
rssi Sample continuous RSSI
rssi! Get last RSSI sample
quit Exit radio setup mode
>app help
app <1|2> Set active image
app update Update app inactive image over Ymodem
app copy Copy the active image to the inactive
>
When working with the CLI the up and down arrows can be used to navigate previously entered
commands. For example, when testing for synchronization if the “show sync” command is issued, the
command can be repeated by selecting up-arrow followed by carriage return.
To Next Page
Loading...