GE MDS TransNEXT NET9L - Technical Specifications

MDS 05-7280A01, Rev. A MDS TransNEXT Technical Manual 53
4.3 Technical Specifications
GENERAL
Input Power
6 to 36 VDC, 1.0 Amp max. 6.0 Watts maximum (NET9L)
6 to 36 VDC, 1.6 Amp max. 9.6 Watts maximum (NET9S)
Below are power consumption estimates:
Table 4-1. TransNEXT Power Consumption:
Mode
NET9L
NET9S
Receive
760 mw
970 mw
Transmit
6.0 W
9.6 W
Ethernet Port
RJ-45 10/100 Mbps Auto-MDIX
Serial Port
RJ-45, supporting RS-232/RS-485
LAN Protocols
802.3 (Ethernet), TCP/IP, ICMP, ssh, http/https
Networking
N/A
Configuration
Serial console, SSH, HTTP/HTTPS
Security
Secure Boot, Signed Firmware, Roll-based Access Control
Physical
Size
5.3” long (13.46 cm), 3.8" wide (9.65 cm), 1.6" high (4.06 cm)
Housing
Die-cast Aluminum
Weight
1.25 lbs. (0.57kg). without mounting hardware
Environmental
Operating Temperature Range
-40°C to +70°C
NOTE Operating temperature range may be reduced based on model configuration. See product label
for detail.
Caution: This device may exceed safe handling temperatures when operated in an ambient temperature
above 55°.
Agency/Regulatory Approvals
FCC
NET9L (Lite) – E5MDS-NET9L