GE MiCOM P40 Agile P14D

Version History P40 Agile P14D, P14N, P94V
10 P40Agile-VH-EN-9
Major Minor
Relay type: Agile P14N, P14D and P94V
Software
Version
Hardware
Suffix
Original Date of
Issue
Description of Changes Technical Documentation
CLONE - CS1 and CS2 does not work independently whey CB Comp enabled for CS2
60 A A Dec-2016
· Voltage vector shift
· Switch Status and control
· IEC61850 Fault Records
· Code Review Report - Bad task priority change in DSP DTC transmit task
· Permanent ethernet communication loss in P40 Agile relays
· DDB #146 ""Prot'n Disabled"" events are read as ""test mode"" via CS103 protocol.
. No events read from CS103 protocol for DDB #441 ""Test Mode"", DDB #771 ""GOOSE IED Absent"", DDB #780
""IP Addr Conflict"", DDB #1200 ""Monitor bit 1"" to DDB #1207 ""Monitor bit 8"".
. IED reboot during the Endurance Test (Stress Test) at 69Hz
. Agile RSTP is non-responsive at 10Mbps
. Relay contact 1 doesn’t persist data on P14DH model after reboot
61 A A April 2017
· TEFD new algorithm
· Vn input implementation change
· New In RMS measurement
. 64 Virtual Inputs
. Editable user alarms
. Maintenance Record Generated Everytime Gateway is configured in DNP configuration
. CS1 and CS2 does not work independently whey CB Comp enabled for CS2
P14D-TM-EN-9
P14N-TM-EN-9
P94V-TM-EN-9
P14D-TM-EN-8
P14N-TM-EN-8
P94V-TM-EN-8