EasyManuals Logo
Home>GE>Refrigerator>Monogram

GE Monogram Installation Instructions

GE Monogram
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Installation
Automatic Icemaker
Reverse
Door
Swing
Tools Required:
• 1/4” and 5/16” wrench
• Flat putty knife
• Phillips screwdriver
Important:
Disconnect power to the ice machine.
Remove the handle screws and lift off
handle. (On black and white models only.)
• Remove the hinge pin from the top hinge.
• Lift the door off of the bottom hinge. Place
the hinge pin back into the top hinge.
Reverse the door endcaps:
• Remove the screws and endcaps from the
door, top and bottom.
• Place the top endcap onto the bottom of the
opposite side of the door with the long flat
side facing the door front.
• Place the bottom endcap onto the top of the
opposite side of the door, with the long flat
side facing the door front.
• Set the door aside.
Reverse the hinges:
• Using a flat putty knife, remove the screw
hole plugs opposite of the door hinges, top
and bottom. Set aside.
• Remove the two screws holding top hinge.
• Turn the hinge upside down, with the hinge
pin pointing up. Reinstall the hinge on the
opposite side at the bottom of the door.
• Remove the bottom hinge. Turn the hinge
upside down and install on the opposite side
at the top.
• Push screw hole plug buttons (supplied)
into the original screw holes.
• Remove the top hinge pin.
• Place plastic hinge sleeve on the bottom
hinge and position the door onto the pin.
• Place plastic hinge sleeve in the top hinge
hole on the door. Align the door on the
bottom hinge and replace top hinge pin.
Reinstall handle with original screws.
To reverse the door catch:
• Remove the plastic screws from
the opposite side of the door.
• Remove the metal screws from
the magnetic door catch and
reinstall on the opposite side
of the door.
• Install the plastic screw into
place on the opposite side of
the door.
Parts Identification: (For Reference Only)
Hinge Pin
5/16" Hex Head
Hinge Screw
Handle Screw
Endcap Screw
Top Hinge
Bottom Hinge
Top Hinge
Bottom Hinge
Parts Supplied:
4 plug buttons
Reverse
Door Catch
Position
Hinge Pin
Hinge Sleeve/
Door Stop
Hinge
Plugs
Hex Head Hinge Screw
Plugs
Hinge Sleeve/
Door Stop
Hex Head
Hinge Screw
Hinge Pin
Hinge
4 Hinge Screws (on some models)

Other manuals for GE Monogram

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Monogram and is the answer not in the manual?

GE Monogram Specifications

General IconGeneral
BrandGE
ModelMonogram
CategoryRefrigerator
LanguageEnglish

Related product manuals