GE MultiLink ML1600

QUICK START GUIDE
MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE QS–25
Z Ensure that the LINK LOSS ALTER feature is enabled on port A1.
Z To save the change (if made) click on the Save icon.
Z Repeat this procedure for the fiber optic port on the second
switch..
To test the operation of the redundancy proceed as follows:
Save
Enable LLA on
both switch ports
connected to the
normal and
alternate UR
ports
Primary Fiber Optic
Ethernet Port
Alternate Ethernet
Port (optional)