Appendix A: Login Administration
Optima XR220amx X-Ray System 54400222-1EN Rev 1 DRAFT 11092010 A-5
Operator Manual © 2010 General Electric Company. All rights reserved.
– Emergency Prompt - The text that will be displayed to any user logging in as emergency. The user
is asked to enter information (usually their actual user name). This text is the text that will appear
in that prompt for information.
7. Press [Apply Configuration].
x To make a configuration change, make the necessary changes on the fields, and press the Apply
Configuration button. If there was a problem with making the changes (such as an invalid value or
a problem contacting the back-end Servlet) you will see a message box indicating this error with a
description of the error. If the changes are successful, after the 'Apply Configuration' button is
pressed, then you will see a brief message indicating that the changes were applied in a green
label. If at any time, you want to revert your changes to what is currently saved on the back-end,
you can press the Restore Configuration button. This will undo any changes that you have made
that have not yet been saved by pressing the Apply Configuration Button. (Once you press the
'Apply Configuration' button and get the confirmation label, the changes have been applied).
DRAFT REVIEW COPY
CTRL+SHIFT+F to search using Search Index (faster)
To Next Page
Loading...
Need help?
General
