How to fix a GE dishwasher that will not start?
If your GE dishwasher won't start, first ensure the start pad is pressed within 4 seconds of closing the door. This is a safety feature. Also, verify the dishwasher isn't in demo mode. If these steps don't resolve the issue, check the voltage input to the dishwasher and verify the door switch operation. You may also need to check the main board Service LED.
What to do if the start button on my GE dishwasher does not respond?
If the start button on your GE dishwasher doesn't respond, or it beeps three times when pressed, and other buttons work, the dishwasher may be in demo mode. To exit demo mode, press and hold the “START” and “HEATED DRY” buttons simultaneously for 5 seconds.
Why is my GE PDT855SxJ0 dead, with no lights or sound?
If your GE dishwasher is completely unresponsive with no LEDs, button operation, or beeping, it could be due to a tripped CSM (Current Sense Module). The CSM must be fully diagnosed.
Intended for use by individuals possessing adequate electrical, electronic, and mechanical experience.
Ensure grounding wires, screws, straps, clips, nuts, or washers are properly fastened.
Details AC voltage specifications for various dishwasher components.
Details DC voltage specifications for various dishwasher components.
Provides common symptoms and diagnoses for a dishwasher that will not start.
Explains the location and connection of the junction box for house voltage.
Procedure to enter Consumer Error Mode and interpret LED status and error codes.
Instructions on how to enter Service Mode and reset the CSM.
General| Type | Built-In |
|---|---|
| Capacity | 16 place settings |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Third Rack | Yes |
| Stainless Steel Tub | Yes |
| Heated Dry | Yes |
| Delay Start | Yes |
| Wash Cycles | Heavy, Light, Normal, Rinse |
| Options | Hi-Temp Wash, Sanitize |
| Color | Stainless Steel |
| Features | Hard Food Disposer |
| Style | Traditional |
To Next Page
