How to fix a GE PDT845SxJ0 that will not start?
If your GE dishwasher won't start, first ensure the start pad is pressed within 4 seconds of closing the door. This is a safety feature. Also, verify the dishwasher isn't in demo mode. If these steps don't resolve the issue, check the voltage input to the dishwasher and verify the door switch operation. You may also need to check the main board Service LED.
What to do if the start button on my GE dishwasher does not respond?
If the start button on your GE dishwasher doesn't respond, or it beeps three times when pressed, and other buttons work, the dishwasher may be in demo mode. To exit demo mode, press and hold the “START” and “HEATED DRY” buttons simultaneously for 5 seconds.
Why is my GE PDT845SxJ0 Dishwasher dead, with no lights or sound?
If your GE dishwasher is completely unresponsive with no LEDs, button operation, or beeping, it could be due to a tripped CSM (Current Sense Module). The CSM must be fully diagnosed.
General| Brand | GE |
|---|---|
| Model | PDT845SxJ0 Series |
| Category | Dishwasher |
| Language | English |
Intended use and disclaimer for service guide users, emphasizing qualifications.
Essential safety steps before and during servicing, including power disconnection.
Required safety gear like glasses, gloves, and boots for repairs.
The 6-step process for safely servicing appliances by disconnecting power.
Using Service LED and flashing lights for diagnostics.
Troubleshooting steps for a dishwasher that fails to initiate operation.
Main control board, CSM, error codes, and Consumer Error Mode.
Entering Service Mode and performing diagnostic load tests.
Flowchart for diagnosing circulation pump failure.
Troubleshooting for drain pump issues and variable speed motor.
Troubleshooting steps for heat element malfunctions.
To Next Page
