EasyManua.ls Logo

GE PGB940 - User Manual

GE PGB940
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Write the model and serial
numbers here:
Model # _________________
Serial # _________________
You can find the rating label on the
front behind the range drawer.
ESPAÑOL
Para consultar una version en
español de este manual de
instrucciones, visite nuestro sitio de
internet GEAppliances.com.
OWNER’S MANUAL
RANGES
Self-Cleaning Gas
49-85221-2 12-18 GEA
SAFETY INFORMATION .......... 3
USING THE RANGE
In Case of a Power Failure ............... 8
Surface Burners ........................ 8
Griddle ................................10
Oven Controls ..........................12
Special Features ........................14
Sabbath Mode ..........................15
Cookware Guidelines ....................16
Cooking Modes .........................16
Oven Racks ............................17
Probe .................................18
Cooking Guide .........................19
Warming Drawer Guide .................20
Aluminum Foil and Oven Liners ..........20
WiFi Connect ..........................21
Oven Air Vents .........................21
CARE AND CLEANING
Oven – Exterior ........................ 22
Oven – Interior ........................ 23
Probe ................................24
Cooktop ..............................24
Door and Drawer ...................... 27
Oven Light ............................ 28
Oven Door ............................ 28
TROUBLESHOOTING TIPS .......29
LIMITED WARRANTY ............34
ACCESSORIES ....................35
CONSUMER SUPPORT ...........36
PGB911
PGB930
PGB940
JGS760
GE is a trademark of the General Electric Company. Manufactured under trademark license.

Table of Contents

Questions and Answers

  • R
    richardhaasSep 14, 2025
    What to do if my GE PGB940 burners do not light?
    • J
      Jennifer ObrienSep 14, 2025
      If the burners on your GE Ranges aren't lighting, first ensure the range is fully plugged into a properly grounded electrical outlet. If you are using gas, check that the gas supply is connected and turned on. Also, check your home's fuse or circuit breaker. Make sure burner parts are replaced correctly. Check for clogged burner slots near the electrode, or the round lighter port on the oval burner, and clean them if necessary. If there is food residue on electrode, lightly polish flat tip of electrode with nail file or sandpaper until shiny.
  • H
    harrisjustinAug 25, 2025
    How to reset the clock on my GE Ranges after a power outage?
    • M
      Mrs. Brandi LewisAug 26, 2025
      If you've experienced a power outage or surge and the clock on your GE Ranges is flashing, you'll need to reset the clock. If the oven was in use during the outage, you must first press the Cancel/Off pad, then set the clock, and finally reset any cooking function you were using.
  • B
    Bryan LindseyAug 26, 2025
    What to do if my GE PGB940 Ranges oven door will not open or LOCKED light is on when I want to cook?
    • M
      mark01Aug 26, 2025
      If the oven door of your GE Ranges won't open and the LOCKED light is on, it's likely because the oven temperature hasn't cooled down enough. Press the Cancel/Off pad and allow the oven to cool below the locking temperature.
  • D
    Desiree DavisNov 22, 2025
    Why won't the burners light on my GE PGB940 Ranges?
    • C
      cmcguireNov 22, 2025
      If the burners on your GE Ranges aren't lighting, several factors could be at play. First, ensure the range is fully plugged into a live, properly grounded electrical outlet. Also, check that the gas supply is connected and turned on, referring to the Installation Instructions for guidance. A blown fuse or tripped circuit breaker could also be the cause, so replace the fuse or reset the breaker. Additionally, make sure burner parts are correctly replaced, consulting the Care and Cleaning section. Clear any clogs from burner slots near the electrode or the round lighter port on the oval burner by removing and cleaning the burners, and check the electrode area for burned-on food or grease. Finally, polish the flat tip of the electrode with a nail file or sandpaper until shiny to remove any f...
  • J
    Jennifer GeorgeSep 15, 2025
    Why is my GE Ranges food not broiling properly?
    • T
      Tina HessSep 15, 2025
      If your food isn't broiling properly in your GE Ranges, ensure you've selected the appropriate broil mode. Check the Cooking Guide for proper rack position suggestions. If using aluminum foil on the broil pan, wrap tightly and add slits conforming to those in the pan to allow grease to drain.
  • J
    Jessica RogersSep 23, 2025
    Why do my GE PGB940 Ranges surface burners light but bake and broil burners do not?
    • M
      mpayneSep 23, 2025
      If the surface burners on your GE Ranges light, but the bake and broil burners do not, the gas to the oven burners may have been shut off. The oven gas shut-off is located on the gas regulator near the gas line attachment to your range. Locate it and flip the lever.
  • D
    Daniel BurchSep 7, 2025
    What to do if the oven light does not work in my GE Ranges?
    • A
      Alicia WhiteSep 7, 2025
      If the oven light in your GE Ranges isn't working, the light bulb may be loose or defective. Try tightening or replacing the bulb.
  • T
    Teresa WilliamsSep 8, 2025
    Why are the burner flames very large or yellow on my GE PGB940?
    • T
      Timothy WadeSep 8, 2025
      If the burner flames on your GE Ranges are very large or yellow, it indicates an improper air to gas ratio. If your range is connected to Propane gas, contact the technician who installed your range or made the conversion.
  • J
    Jennifer SavageSep 23, 2025
    What does it mean if Lock Controls or Control Lockout feature is activated on my GE PGB940?
    • D
      Dorothy DaySep 23, 2025
      If LOC ON appears in the display of your GE Ranges, the range control is locked. Turn this feature off to use the range. See the Lock Control feature in the Oven Controls section.
  • T
    Tina PalmerSep 1, 2025
    What to do if my GE Ranges has power outage and clock flashes?
    • K
      kimmonicaSep 1, 2025
      If you've experienced a power outage and the clock on your GE Ranges is flashing, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock and resetting any cooking function.

GE PGB940 Specifications

General IconGeneral
TypeFreestanding
Fuel TypeGas
Width30 in
Burners5
Self-CleaningYes
Convection OvenYes
ColorStainless Steel
Cooktop MaterialPorcelain
Ignition TypeElectronic
Oven Capacity5.0 cu ft

Related product manuals