How to prevent condensation in my GE Profile PGB945SEF2SS drawer?
To address excessive condensation in the drawer, remove any liquid present. Ensure foods are covered with a lid or aluminum foil. Additionally, consider reducing the temperature setting.
What to do if 'DOOR' flashes on the display of my GE Profile PGB945SEF2SS?
If the self-clean cycle has been selected but the door isn't closed properly, the display will show flashing “DOOR”. Ensure the oven door is fully closed.
Why is my GE Profile PGB945SEF2SS oven not working?
If the oven doesn't work or appears not to work, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Ensure that the oven controls are properly set. See the Using the Oven section. Also, verify that the oven is not in Sabbath Mode. See the Special Features section.
Why is the locked light on my GE Ranges when I want to cook?
If the oven door is locked because the temperature inside the oven has not dropped below the locking temperature, the locked light will remain on. Press the Cancel/Off pad and allow the oven to cool completely.
How to keep food from drying out in GE Ranges warming drawer?
To prevent food from drying out in the lower oven drawer or warming drawer, cover the food with a lid or aluminum foil to retain moisture. Also, make sure the drawer is fully closed until the latch engages.
Why does my GE Profile PGB945SEF2SS oven door glass look tinted?
This is normal. Under certain light or angles you may see this tint or rainbow color.
What does 'F and a number' mean on my GE Profile PGB945SEF2SS display?
If you see “F— and a number or letter” flashing, it indicates a function error code. First, press the Cancel/Off pad and allow the oven to cool for one hour, then try putting the oven back into operation. If the error code repeats, disconnect all power to the oven for at least 10 seconds and then reconnect the power. If the function error code continues, it is recommended to call for service.
Why does my GE Profile PGB945SEF2SS Ranges shut off when the door is open?
If the cooking mode shuts off when the door is left open, it is because the door was left open after the “Shut Door” message flashed in the display. Close the door, and normal mode will resume.
Why aren't the clock and timer working on my GE Profile PGB945SEF2SS?
A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
What to do if the GE Profile PGB945SEF2SS Ranges oven door won't open after cleaning?
If the oven door will not open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature.
To Next Page
General