Why does my GE Profile PGB945SEF2SS Ranges shut off when the door is open?
If the cooking mode shuts off when the door is left open, it is because the door was left open after the “Shut Door” message flashed in the display. Close the door, and normal mode will resume.
What does 'F and a number' mean on my GE Profile PGB945SEF2SS display?
If you see “F— and a number or letter” flashing, it indicates a function error code. First, press the Cancel/Off pad and allow the oven to cool for one hour, then try putting the oven back into operation. If the error code repeats, disconnect all power to the oven for at least 10 seconds and then reconnect the power. If the function error code continues, it is recommended to call for service.
Why does my GE Ranges display say 'Turn Burners Off'?
If a cooktop burner was on when the range was going into or out of self-clean modes, the display will show “TURN BURNERS OFF”. Ensure all burners are turned off.
Why isn't my food baking properly in my GE Profile PGB945SEF2SS Ranges?
If food does not bake properly, it could be due to oven controls being improperly set. See the Cookware section. The rack position may be incorrect, or the rack may not be level. See the Cooking Guide. Incorrect cookware or cookware of improper size may be used. See the Cookware section. The oven temperature may need adjustment. See the Special Features section. Also, ingredient substitution can change the recipe outcome.
What to do if 'Shut Door' flashes on my GE Profile PGB945SEF2SS Ranges display?
If the oven door has been left open, the display will show “Shut Door”. Close the door, and the oven will resume normal operation.
Why do the surface burners light but oven doesn't on my GE Profile PGB945SEF2SS?
If the surface burners light but the oven does not, the oven gas shut-off valve may have accidentally been moved during cleaning or moving. To check the oven gas shut-off valve, remove the drawer and clean the range section.
Why is my GE Profile PGB945SEF2SS Ranges oven not clean after self-cleaning?
If the oven is not clean after a clean cycle, it could be due to improperly set oven controls. See the Cleaning the Oven section. It could also be that the oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle.
Why aren't the clock and timer working on my GE Profile PGB945SEF2SS?
A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
Why won't the burners light on my GE Ranges?
If the burners do not light, ensure the electrical plug is plugged into a live, properly grounded outlet. Also, check that the gas supply is connected and turned on. Refer to the Installation Instructions that came with your range.
What to do if the GE Profile PGB945SEF2SS Ranges oven door won't open after cleaning?
If the oven door will not open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature.
To Next Page
General