– 44 –
To replace the lower inner door assembly:
1. Remove the outer door assembly. (See To
remove the lower outer door assembly.)
2. Remove the four T-15 Torx screws (2 on each
side) that attach each door hinge to the inner
door. Carefully turn the door over and remove
both door hinges.
3. Remove the 2 Phillips-head screws (1 on each
side) from the bottom of the inner door.
(Continued next page)
6. Remove the six 1/4-in. hex-head screws (3 on
each side) that hold the door handle to the outer
door assembly.
4. Remove the 10 Phillips-head screws and the
heat barrier from the inner door panel.
5. Remove the inner glass assembly from the inner
door.
Heat Barrier
Inner Glass Assembly
To Next Page
Loading...
Need help?
General
