10 49-2000867 Rev. 2
Precision Cooking (Cont.)
Precision Cooking with Precision Probe or Hestan Cue® Cookware
1. Place cookware on desired induction element for
Precision Cooking.
2. Press Precision Cooking pad for the element you
wish to use.
3. Press On/Off pad.
4. Activate cookware according to the activation
instruction table.
5. Set temperature by swiping finger or using +/- keys
on the element control or you can control temperature
using the SmartHQ App on your smart phone or
tablet.
NOTE: Only one burner may run a Precision Cooking
mode at a time. If another Precision Cooking mode is
attempted, the burner in use for Precision Cooking will
flash and the following error will be displayed.
USING THE RANGE: Precision Cooking
Precision
Cooking
Precision
Cooking
Gray Arc
Swipe Area
OR
Supported
Devices How to Activate Control with this App
Hestan
Cue
®
cookware
Firmly double tap the
black plastic endcap
Hestan Cue
®
(by Hestan Smart Cooking)
Precision
Probe Press side button once SmartHQ
Use Precision Cooking with Compatible Bluetooth Precision Probe or Hestan Cue
®
Cookware
The range is able to communicate via Bluetooth with
smart accessories such as Hestan Cue
®
cookware or
Precision Probe. Each smart accessory must be paired
with the range to establish the Bluetooth connection.
To pair a Bluetooth device to the range, press the
Settings pad and select Bluetooth. Select Pair and
activate your device to initiate the device’s pairing mode.
Refer to the table below for device specific instructions.
Once paired, the Hestan Cue
®
cookware and Precision
probe becomes available as a Precision Cooking option
for any burner. Multiple smart accessories may be
paired. You will be prompted to choose one to activate
each time you use Precision cooking. (Precision cooking
is not available on the warming zone.) Only one burner
may run a Precision Cooking mode at a time.
To Next Page
Loading...
