How to remove scratches on GE PB930 Ranges cooktop glass surface?
Scratches on the cooktop glass surface of your GE Ranges are generally not removable. However, tiny scratches may become less visible over time with regular cleaning. To prevent scratches, use recommended cleaning procedures and ensure cookware bottoms are clean and smooth.
How to fix GE Ranges clock and timer that do not work?
If the clock and timer on your GE Ranges aren't working, start by checking the fuse box or circuit breaker in your home and replace the fuse or reset the breaker if necessary. Ensure the range is fully plugged into a properly grounded electrical outlet. Also, make sure the oven controls are properly set, consulting the Using the kitchen timer section for guidance.
Why GE PB930 oven will not self-clean?
If your GE Ranges oven won't self-clean, it could be because the temperature is too high. Allow the oven to cool down before resetting the controls. Also, ensure that the oven controls are properly set. Please refer to the Cleaning the Oven section.
How to get the display to show “SF” on GE Ranges?
If you're unable to get the display to show “SF” on your GE Ranges, the BROIL HI/LO and BAKE pads must be touched at the same time and held for 3 seconds.
Why GE PB930 Ranges surface units are frequently cycling off and on?
If the surface units on your GE Ranges are frequently cycling off and on, use only flat cookware to minimize cycling.
How to fix GE PB930 oven light that does not work?
If the oven light in your GE Ranges isn't working, try tightening or replacing the bulb.
Why is there a strong odor coming from my GE Ranges oven?
A strong odor from the insulation around the inside of your GE Ranges oven is normal for the first few times the oven is used. This is temporary and will go away after several uses or a self-clean cycle.
Why does my GE Ranges oven sometimes takes longer to preheat to the same temperature?
Cookware or food in the oven will cause the oven to take longer to preheat. Remove items to reduce preheat time. Adding more racks to the oven will also cause the oven to take longer to preheat, so remove some racks. The different cooking modes use different preheat methods to heat the oven for the specific cooking mode, so some modes will take longer than others (i.e. convection bake).
What causes pitting (or indentation) of the GE Ranges cooktop?
If there is pitting (or indentation) of the cooktop caused by a hot sugar mixture spilled on the cooktop, call a qualified technician for replacement.
Why is my GE Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, it may need adjustment. Please refer to the Special Features section.
To Next Page
General
