GE PB935 - User Manual

Questions and Answers

A
Austin JohnsonSep 6, 2025
What does “F— and a number or letter” flashing in the display of my GE PB935 mean?
- V
  Victor HurstSep 6, 2025
  If you see “F— and a number or letter” flashing in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad, allow the oven to cool for one hour, and then put the oven back into operation. If the function code repeats, disconnect all power to the oven for at least 30 seconds and then reconnect power. If the function error code continues, call for service.
M
Marissa PetersonAug 25, 2025
What to do if the oven door will not open after a clean cycle on my GE Ranges?
- N
  nfriedmanAug 25, 2025
  If your GE Ranges oven door will not open after a clean cycle, it is likely that the oven is still too hot. Allow the oven to cool below the locking temperature before attempting to open it.
P
Patricia CarneyAug 25, 2025
What to do if my GE Ranges oven is not clean after a clean cycle?
- V
  victoria52Aug 26, 2025
  If your GE Ranges oven is not clean after running a clean cycle, this may be because the oven controls were improperly set. See the Cleaning the Oven section for guidance. Another cause may be that the oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
D
Dennis Hernandez IISep 14, 2025
Why is there steam from the vent of my GE PB935 Ranges?
- W
  William SextonSep 14, 2025
  When using the ovens, it is normal to see steam coming out of the oven vents. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase.
M
Michael JacksonSep 23, 2025
Why are there areas of discoloration on my GE PB935 cooktop?
- S
  Sydney RoblesSep 23, 2025
  Areas of discoloration on your GE Ranges cooktop can be caused by food spillovers not cleaned before the next use. See the Cleaning the glass cooktop section. It can also be caused by a hot surface on a model with a light-colored cooktop, which is normal. The surface may appear discolored when it is hot, but this is temporary and will disappear as the glass cools.
R
rosssarahSep 10, 2025
Why does my GE Ranges oven door glass appear to be "tinted" or have a "rainbow" color?
- K
  Kristen HobbsSep 12, 2025
  If your GE Ranges oven door glass appears to be "tinted" or have a "rainbow" color, this is normal. The inner oven glass is coated with a heat barrier to reflect the heat back into the oven to prevent heat loss and keep the outer door cool while baking. Under certain light or angles, you may see this tint or rainbow color.
R
Richard CarterSep 2, 2025
Why is my GE Ranges oven not clean after a clean cycle?
- J
  Jose SmithSep 2, 2025
  If your GE Ranges oven isn't clean after a cleaning cycle, the oven controls may not have been set correctly. Also, if the oven was heavily soiled, you may need to clean up heavy spillovers before starting the clean cycle again, or run the cycle for a longer period.
B
Brady LoveSep 2, 2025
Why is there excessive smoking during the clean cycle of my GE PB935 oven?
- S
  Susan RowlandSep 2, 2025
  Excessive smoking during the clean cycle of your GE Ranges oven is likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to clear the smoke, wait for the LOCKED light to turn off, wipe up the excess soil, and then reset the clean cycle.
J
Jason BernardSep 18, 2025
Why does my new GE PB935 Ranges oven cook differently than my old one?
- T
  Tricia BergSep 22, 2025
  Your new GE Ranges oven has a different cooking system than your old oven, which may cause it to cook differently. Carefully monitor recipe times and temperatures for the first few uses. If you believe the oven is too hot or cold, you can adjust the temperature yourself to match your cooking preferences. See the Special Features section. Note that this adjustment affects Bake and Convection Bake temperatures, but not Convection Roast, Broil, or Clean.
A
Ashley VargasAug 28, 2025
Why is there excessive smoking during the clean cycle of my GE Ranges?
- J
  Jacqueline MayAug 28, 2025
  If you notice excessive smoking during a clean cycle of your GE Ranges, it's likely due to excessive soil or grease inside the oven. Press the Cancel/Off pad, open the windows to clear the smoke, wait for the LOCKED light to turn off, then wipe up the excess soil and reset the clean cycle.