What to do if the oven door will not open after a clean cycle on my GE Ranges?
If your GE Ranges oven door will not open after a clean cycle, it is likely that the oven is still too hot. Allow the oven to cool below the locking temperature before attempting to open it.
What to do if my GE Ranges oven is not clean after a clean cycle?
If your GE Ranges oven is not clean after running a clean cycle, this may be because the oven controls were improperly set. See the Cleaning the Oven section for guidance. Another cause may be that the oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
What to do if oven does not work on my GE PB935 Ranges?
If your GE Ranges oven does not work or appears not to work, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Also, oven controls may be improperly set. See the Using the Oven section. Finally, the oven may be in Sabbath Mode. Verify, that the oven is not in Sabbath Mode. See the Special Features section.
What to do if my GE PB935 Ranges oven does not work?
If your GE Ranges oven isn't working, check if a fuse in your home has blown or if the circuit breaker has tripped and replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. Verify that the oven is not in Sabbath Mode.
What to do if my GE Ranges surface units do not work properly?
If the surface units on your GE Ranges are not working correctly, first check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. Then, verify that the cooktop controls are correctly set for the surface unit you're using.
How to fix GE Ranges surface units that will not maintain a rolling boil?
If surface units on your GE Ranges aren't maintaining a rolling boil or cooking isn't fast enough, ensure you're using the correct cookware size that matches the diameter of the surface unit. If the power voltage in your area is low, covering the pan with a lid can help retain heat until the desired temperature is achieved.
Why is the DOOR LOCK light on when I want to cook in my GE PB935 Ranges?
If the DOOR LOCK light is on when you want to cook on your GE Ranges, it means the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. To resolve this, press the Cancel/Off pad and allow the oven to cool down completely.
What does it mean when DOOR LOCK flashes in the display of my GE PB935?
If the DOOR LOCK flashes in the display of your GE Ranges, it means that the self-clean cycle has been selected but the oven door is not closed properly. Ensure the oven door is fully closed to start the self-clean cycle.
Why is there excessive smoking during the clean cycle of my GE Ranges?
If you notice excessive smoking during a clean cycle of your GE Ranges, it's likely due to excessive soil or grease inside the oven. Press the Cancel/Off pad, open the windows to clear the smoke, wait for the LOCKED light to turn off, then wipe up the excess soil and reset the clean cycle.
Why is my GE Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, the oven temperature may need adjustment. See the Special Features section for instructions on how to adjust the temperature.
Crucial instructions and warnings before operating the appliance.
Standard safety guidelines applicable to all operations of the appliance.
Warnings and precautions regarding flammable materials near the appliance.
Emergency procedures to follow in case of a fire involving the appliance.
Safety rules specifically for using the appliance's cooktop.
Safety advice related to the radiant glass cooktop surface.
Safety precautions to follow when using the oven.
Guidelines for safe operation of the self-cleaning oven feature.
Common problems and their potential causes and solutions before seeking service.
To Next Page
General
