GE PB935 - User Manual

Questions and Answers

P
Patrick WintersAug 29, 2025
Why don't the clock and timer work on my GE PB935 Ranges?
- G
  Gavin SmithAug 30, 2025
  If the clock and timer on your GE Ranges do not work, a fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Also, ensure the plug on the range is completely inserted in the electrical outlet and that oven controls are properly set. See the Oven controls section.
A
Austin JohnsonSep 6, 2025
What does “F— and a number or letter” flashing in the display of my GE PB935 mean?
- V
  Victor HurstSep 6, 2025
  If you see “F— and a number or letter” flashing in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad, allow the oven to cool for one hour, and then put the oven back into operation. If the function code repeats, disconnect all power to the oven for at least 30 seconds and then reconnect power. If the function error code continues, call for service.
A
Ashley VargasAug 28, 2025
Why is there excessive smoking during the clean cycle of my GE Ranges?
- J
  Jacqueline MayAug 28, 2025
  If you notice excessive smoking during a clean cycle of your GE Ranges, it's likely due to excessive soil or grease inside the oven. Press the Cancel/Off pad, open the windows to clear the smoke, wait for the LOCKED light to turn off, then wipe up the excess soil and reset the clean cycle.
M
Mike WilsonSep 15, 2025
How to remove scratches on cooktop glass surface of GE PB935?
- J
  jamescruzSep 15, 2025
  Scratches on the cooktop glass surface of your GE Ranges are not removable. Tiny scratches will become less visible in time as a result of cleaning. To avoid scratches, use the recommended cleaning procedures. Make sure bottoms of cookware are clean before use, and use cookware with smooth bottoms.
S
Sherri LawrenceSep 7, 2025
Why won’t the storage drawer close on my GE Ranges?
- J
  Jeffrey RichardsSep 7, 2025
  If the storage drawer on your GE Ranges won’t close, the power cord may be obstructing the drawer in the lower back of the range. Reposition the drawer and power cord. See the Storage Drawer Removal Instructions in the Care and cleaning of the range section. Also, the rear drawer support may be on top of the guide rail. Reposition the drawer. See the Storage Drawer Removal instructions in the Care and cleaning of the range section. Finally, the soft close mechanism may be uncoupled from the drawer. Reset the mechanism, see Soft Close Drawer section.
R
rosssarahSep 10, 2025
Why does my GE Ranges oven door glass appear to be "tinted" or have a "rainbow" color?
- K
  Kristen HobbsSep 12, 2025
  If your GE Ranges oven door glass appears to be "tinted" or have a "rainbow" color, this is normal. The inner oven glass is coated with a heat barrier to reflect the heat back into the oven to prevent heat loss and keep the outer door cool while baking. Under certain light or angles, you may see this tint or rainbow color.
D
Dennis Hernandez IISep 14, 2025
Why is there steam from the vent of my GE PB935 Ranges?
- W
  William SextonSep 14, 2025
  When using the ovens, it is normal to see steam coming out of the oven vents. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase.
M
Michael JacksonSep 23, 2025
Why are there areas of discoloration on my GE PB935 cooktop?
- S
  Sydney RoblesSep 23, 2025
  Areas of discoloration on your GE Ranges cooktop can be caused by food spillovers not cleaned before the next use. See the Cleaning the glass cooktop section. It can also be caused by a hot surface on a model with a light-colored cooktop, which is normal. The surface may appear discolored when it is hot, but this is temporary and will disappear as the glass cools.
S
sharoncollinsAug 26, 2025
What to do if oven does not work on my GE PB935 Ranges?
- F
  Fernando PooleAug 26, 2025
  If your GE Ranges oven does not work or appears not to work, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Also, oven controls may be improperly set. See the Using the Oven section. Finally, the oven may be in Sabbath Mode. Verify, that the oven is not in Sabbath Mode. See the Special Features section.
P
Patricia CarneyAug 25, 2025
What to do if my GE Ranges oven is not clean after a clean cycle?
- V
  victoria52Aug 26, 2025
  If your GE Ranges oven is not clean after running a clean cycle, this may be because the oven controls were improperly set. See the Cleaning the Oven section for guidance. Another cause may be that the oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.