Why don't the clock and timer work on my GE PB935 Ranges?
If the clock and timer on your GE Ranges do not work, a fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Also, ensure the plug on the range is completely inserted in the electrical outlet and that oven controls are properly set. See the Oven controls section.
Why won't my GE PB935 Ranges oven self-clean?
If your GE Ranges oven does not self-clean, it could be because the temperature is too high to set a self-clean operation. Allow the oven to cool and reset the controls. Also, oven controls may be improperly set. See the Cleaning the Oven section.
Why is there excessive smoking during broiling in my GE PB935?
If you experience excessive smoking during broiling with your GE Ranges, it is likely that the food is too close to the burner element. Lower the rack position of the food to increase the distance from the burner.
What to do if surface units do not work properly on my GE PB935?
If the surface units on your GE Ranges aren't working properly, first check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. Also, ensure that the correct control is set for the specific surface unit you are trying to use.
Why does food not broil properly in my GE PB935?
If food does not broil properly in your GE Ranges, ensure that the oven controls are set correctly by selecting the appropriate broil mode. Also, use the proper rack position as suggested in the Cooking Guide. Make sure food is not being cooked in a hot pan and that cookware is suited for broiling. If using aluminum foil on the broiling pan, ensure it has been fitted properly and slit as recommended. In some areas, the power (voltage) may be low, preheat the broil element for 10 minutes.
Why won’t my GE PB935 oven steam clean?
To resolve this, allow the oven to cool to room temperature and reset the controls. Also, oven controls may be improperly set. See the Using Steam Clean section. Finally, make sure you close the door to start steam clean cycle.
Why is my GE Ranges oven not clean after a clean cycle?
If your GE Ranges oven isn't clean after a cleaning cycle, the oven controls may not have been set correctly. Also, if the oven was heavily soiled, you may need to clean up heavy spillovers before starting the clean cycle again, or run the cycle for a longer period.
Why is there excessive smoking during the clean cycle of my GE PB935 oven?
Excessive smoking during the clean cycle of your GE Ranges oven is likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to clear the smoke, wait for the LOCKED light to turn off, wipe up the excess soil, and then reset the clean cycle.
What to do if my GE PB935 Ranges oven door will not open after a clean cycle?
If your GE Ranges oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature.
Why is the DOOR LOCK light on when I want to cook in my GE Ranges oven?
The DOOR LOCK light is on because the oven door is locked as the temperature inside the GE Ranges oven hasn't dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool down.
Crucial instructions and warnings before operating the appliance.
Standard safety guidelines applicable to all operations of the appliance.
Warnings and precautions regarding flammable materials near the appliance.
Emergency procedures to follow in case of a fire involving the appliance.
Safety rules specifically for using the appliance's cooktop.
Safety advice related to the radiant glass cooktop surface.
Safety precautions to follow when using the oven.
Guidelines for safe operation of the self-cleaning oven feature.
Common problems and their potential causes and solutions before seeking service.
To Next Page
General
